FAQ: How Far From Wall To Install Toilet Flange?

Should toilet flange be flush with floor?

The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too. The spacing of the toilet exit “horn” and sealing surface is designed for this height.

What is the rough in distance for a toilet?

A toilet’s rough-in refers to the measurement dimension from the finished wall to the center of mounting holes on the floor flange. Toilets are typically offered in either 10 inch, 12 inch, or 14 inch rough-ins. The 12 inch rough-in is by far the most common in the US.

Should a toilet be flush with the wall?

No, there is no standard distance a toilet tank should set out from the wall. There are standard rough in distances, the most common is 12″ with a few at 10″ and a few at 14″, but the actually distance the tank will be from the wall will vary.

You might be interested:  Readers ask: How To Put On Aikido Hakama?

Should I put the wax ring on the toilet or the flange?

Installing a flange extender or using an extra-thick wax ring will work much better in the long run. Place the wax ring on the closet flange, not on the toilet. Then, pick up the toilet and set it evenly over the closet flange, making sure the bolts come through the bolt holes in the toilet base.

How close can a toilet be to the wall?

Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.

Are all toilets the same distance from the wall?

Start by measuring from the wall behind the toilet to the center of the bolts at the base of the toilet. If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.

How far does an offset toilet flange move?

For the waste water line, an offset toilet flange will allow you to move the toilet a couple of inches in any direction without having to cut a new hole in the floor or reconstruct the waste water pipe.

Can toilets touch walls?

When installing a toilet, there is not a specific distance that the toilet tank should be from the wall. Whether your toilet is one inch from the wall or touching the wall directly, it is really up to your preference.

You might be interested:  FAQ: Where To Buy Arnis?

What do you do with the space behind the toilet?

A common staple for the space over the toilet is an organization or storage station. You can find shelving and cabinetry to go there, or you can come up with a unique storage solution that complements your personal style. Shelving can be installed to hold baskets for bathroom toiletries and tools.

Can I move my toilet away from the wall?

Moving the toilet is not a change to be taken lightly. But if needed, it can be accomplished with substantial plumbing work and a great deal of peripheral work, such as opening up a floor or ceiling, rerouting pipes and drain flange, and re-installing the toilet and other fixtures.

Does a toilet flange need to be glued?

This toilet flange is designed to glue on the inside of the pipe or expand inside the pipe. The bottom of the flange needs to be sitting flush with (or not more than 1/8″ above) the finished floor or else the toilet will rock. The flange should be fastened to the floor. Dry fit the toilet to make sure it doesn’t rock.

Does toilet flange go inside or outside pipe?

This toilet flange is designed to glue on the inside of the pipe or expand inside the pipe. Leave the old toilet flange right in place and glue on the new one at the right elevation for the floor, if it’s plastic. The flange should be sitting with the bottom edge flush with the top of the floor.

Written by

Leave a Reply