- 1 Is it cheaper to buy or build a bookshelf?
- 2 How do you build a bookshelf in a wall?
- 3 How much does it cost to build built in bookshelves?
- 4 How can I make a cheap bookshelf?
- 5 How thick should Wood be for shelves?
- 6 How deep should a built in bookcase be?
- 7 How do you secure a built in shelf to the wall?
- 8 Do Built in bookshelves increase home value?
- 9 Why are built ins so expensive?
- 10 Do built ins add value?
- 11 What is the best wood to build a bookcase?
- 12 How do you make a bookshelf sturdy?
Is it cheaper to buy or build a bookshelf?
So one DIY bookcase would’ve cost me about the same price as the laminate one, but I would still own that same bookcase! When you’re comparing DIY furniture to furniture from other stores that is built to last, there is almost no competition: DIY will be cheaper 99% of the time.
How do you build a bookshelf in a wall?
Library wall to wall bookcases – Bookcase Plans
- Materials: 3/4″ plywood or MDF.
- Step 1: Mark and Drill. Mark location for fixed shelves and drill shelf pin holes for adjustable shelves.
- Step 2: Install fixed shelves to one side.
- Step 3: Attach second side.
- Step 4: Install cleats.
- Step 5: Attach back.
- Step 6: Build Cabinet Base.
- Step 7: Configure and Install Bookcases.
How much does it cost to build built in bookshelves?
Cost of Built-In Bookcases
The cost to have built-in bookshelves installed averages $2,594 or between $1,251 and $3,938 for a carpenter to do the job. If you buy the materials yourself, you can usually get a handyman to install them for $30 to $130 per hour.
How can I make a cheap bookshelf?
Cheap Bookshelves Ideas
- Use simple box to store knowledge.
- One strap of leather and a plank can shine.
- Sculpt a bookshelves with drawers.
- Reshape a plane bookshelves with wooden textures.
- Scale wooden boxes into a timeless piece.
- Plant crown molding on simple bookshelves.
- Pick the right pattern to emphasize your library.
How thick should Wood be for shelves?
Thick Wood Bookshelves
Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.
How deep should a built in bookcase be?
How Deep Should Built in Shelves Be? Take stock of what you’ll be storing on them: trim travel guides or oversize art books, bulky board games or lidded baskets, collectibles large or small. Most shelves are built a minimum of 11 to 12 inches deep, but this is your chance to customize: Go for it!
How do you secure a built in shelf to the wall?
Attach the shelf to the wall by drilling pilot holes through the back corner and into wall studs, then toenailing the shelf to the wall with screws. Don’t drill through the inside of the bookshelf.
Do Built in bookshelves increase home value?
The added storage space from a built in storage unit should increase the home’s value, as long as it is appropriate to the function of the room, is high quality, and is flexible enough to accommodate the next homeowner’s storage needs.
Why are built ins so expensive?
Very simply, there is a lot of labor that goes into producing a high-quality painted finish. Compared to 2-3 coats of a high quality clear lacquer that can be applied in as little as one day, the additional labor costs easily offset the savings of less expensive, “paint grade” materials.
Do built ins add value?
Built–ins can be an investment depending on how custom you want to go, and they’re a permanent addition to your space. “Absolutely built–ins add value to a home. Buyers go wild over built–ins,” says Bynum.
What is the best wood to build a bookcase?
Which Wood is the Strongest for a Bookshelf? If the cost of the materials is not a concern, woods like mahogany, African padauk, and koa are considered the best woods for bookshelves, thanks to their durability, strength, and longevity.
How do you make a bookshelf sturdy?
Cut a piece of 1/8-inch plywood or hardboard to the dimensions you measured, using a circular saw. Set the backing in place. Square the case again and nail the backing to the bookcase with 1-inch finish nails. Drive a few nails into each shelf for added stability.