- 1 How can you tell where a stud is in the wall?
- 2 Can I use my iPhone as a stud finder?
- 3 How do you make sure you found a stud?
- 4 How far apart are wall studs?
- 5 Why do stud finders never work?
- 6 Do stud finder apps really work?
- 7 How do you mount a TV on drywall without studs?
- 8 Can you download a stud finder?
- 9 What can I use if I don’t have a stud finder?
- 10 Is there a free stud finder app for iPhone?
- 11 Is it bad to drill into a stud?
- 12 Is it OK to drill into a stud?
- 13 Do I have to drill into a stud?
How can you tell where a stud is in the wall?
A good starting place is 16 inches from a corner. For better precision, use a tape measure and mark 12 inches, 16 inches, and 24 inches from the corner. Tap the wall at each distance. You’ll hear a solid sound when you tap the part of the wall that is supported by a stud.
Can I use my iPhone as a stud finder?
The iPhone beeps when its magnetometer, in the upper right of the phone, is near metal. Stud Find is an iPhone application that uses the device’s built-in magnetometer to find metal studs, screws, nails and anything metallic in a wall.
How do you make sure you found a stud?
Make a fist and knock on the wall with your knuckles. In some places, you‘ll hear a hollow sound. Other areas will sound more “solid.” The “solid” sound indicates you have knocked on a stud. Studs are located about 16 to 24-inches apart.
How far apart are wall studs?
The general spacing for wall studs is 16 inches on center, but they can be 24 inches.
Why do stud finders never work?
Most magnet type stud finders don’t work effectively since they are dependent on locating the fasteners (screws) used to secure the drywall and they can be very difficult to locate.
Do stud finder apps really work?
Stud finder applications for the smartphone can detect studs behind the wall and other metal objects like earrings and lost keys. Depending on the quality of the app and its capabilities, they can work just as well as a stud finder device, although they often lack the other features that these tools come with.
How do you mount a TV on drywall without studs?
How Can You Mount a TV on the Wall Without Studs?
- Anchors. An anchor is one of the simplest ways to hang a TV on the wall without a stud.
- Toggle Anchors or Molly Bolts. Toggle anchors/toggle bolts look like regular screws, but they come with a butterfly toggle at the end.
- Consider a Mounting Plate.
- Mount Your TV From the Ceiling.
Can you download a stud finder?
Stud finder app for iOS and Android brings the simplicity and effectiveness of a real stud detector tool to your iPhone or Android device. The app uses your device’s compass (magnetometer sensor) to pinpoint metal studs, nails, and screws embedded in all wood wall studs.
What can I use if I don’t have a stud finder?
If you don’t find signs of a stud 16 inches from the first one, measure 24 inches from the first stud and look again there. Drive a small nail into the wall where you believe you have found a stud. If the nail doesn’t hit wood under the plaster or drywall, pull it out and insert a wire hanger into the hole.
Is there a free stud finder app for iPhone?
The highly-rated Smart Metal Detector is a great stud finder option for iOS devices. It is free, but will offer in-app purchases.
Is it bad to drill into a stud?
Drilling a hole in a stud for wiring will weaken the stud – by how much is a function of the size of the hole drilled and where the hole is drilled in the stud. From an electrical perspective drill the hole in the center of the stud and make the hole just big enough that you can easily pull the wire through it.
Is it OK to drill into a stud?
You should not drill or screw deeper than one inch into a stud since electrical wires are typically run through the center of a stud. Another advantage of drilling a pilot hole instead of running a screw straight in is that if you miss the stud a small pilot hole is quicker and easier to repair.
Do I have to drill into a stud?
If you’re hanging shelves or mounting anything heavy to the wall, you’ll probably want to mount it directly to the wall studs. However, you should be drilling pilot holes first before driving in any screws.