FAQ: How To Get Dryer Closer To Wall?

How far should a dryer be from the wall?

According to the installation manual, 5″ is recommend, but 0″ is allowed. The minimum recommended distance is one inch: Additional spacing of 1″ (25 mm) on all sides of the dryer is recommended to reduce noise transfer. The allowable distance seems to be zero inches.

How do you hook up a dryer vent to a tight space?

  1. Pull Out The Dryer. The first step is to pull out the dryer, and unplug the unit.
  2. Disconnect The Old Vent. Now that you are behind the dryer, disconnect the old vent.
  3. Install The Best Dryer Vent Hose For Tight Spaces.
  4. Install Foil Tape.
  5. Push Back Dryer And Check Vent.
  6. The Bottom Line On Dryer Vents in Tight Spaces.

How much room do you need behind a dryer for a vent?

Dryers also need extra space for adequate ventilation. Around six inches of space behind your washer and dryer is ideal.

You might be interested:  Quick Answer: What Message Is Did The Text From The Way Of Aikido Carry?

Can a dryer vent be 3 inch?

Dryers take 4 inch ducting. Ceiling fans take 3 or 4 inch ducting. Your dryer will still work, but the reducer will add a lot of resistance to air flow, and so your dryer will take a bit longer and a bit more electricity to dry your clothes.

What kind of dryer vent hose is best?

Flexible transition hose between the dryer and the wall outlet should be either the foil type or the aluminum flexible duct (most preferred). Do not use the plastic or vinyl. Concealed ducting must be rigid metal (galvanized or aluminum) duct.

How can I get more space behind my dryer?

Altering the setup or modifying the exhaust vents can make a big difference.

  1. Shorten the Hose. Flexible dryer vent hoses are usually much longer than you need.
  2. Move the Exhaust.
  3. Use a Periscope Vent Pipe.
  4. Inset Dryer Vent Connection.
  5. Things to Consider.

What is the best dryer vent hose to use?

A Closer Look at the Best Dryer Vent Hoses

  • Yiju Aluminum Foil Dryer Vent Hose – Flexible Aluminum Pipes.
  • Deflecto Easy Connecting Dryer Vent – Secure Body.
  • Abuff Duct Hose 4 inch by 12 feet – Handles Intense Temperatures.
  • Whirlpool 4396037RP Vent Periscope – Slim Body.
  • Konduone Ultra Durable Vent Hose – Simply Maintained.

How much space do you need around a washer and dryer?

Space Specifications for Washers and Dryers



Washers and dryers placed side by side typically require a horizontal space of 60-inches or five feet. Measure the depth of the appliances (most are around 33-inches) and add six inches for hoses and venting.

You might be interested:  Readers ask: How To Paint Grass On Wall?

Will a 60cm washing machine fit in a 60cm gap?

The standard depth of a washing machine is around 60cm, but some machines have depths between 40 and 50cm for smaller spaces. All washing machines fit under a standard height worktop (90cm) and into a 60cm wide housing gap.

Do electric dryers need to vent outside?

Every electric dryer has to have an outlet through which it expels warm, moist air, or it won’t work. The air is usually loaded with lint, and if you don’t vent it outside, it can cause all kinds of problems. The moisture can rot framing and promote mold growth, and the lint can catch fire.

Can I use PVC pipe for a dryer vent?

While PVC is meant for plumbing and venting applications, PVC is not approved for venting a clothes dryer and should not be used for this application. PVC pipe can allow a static charge to build up; this static charge can ignite the dryer lint leading to a fire.

Are all dryer vents 4 inches?

Most dryer ducts are round and 4 inches in diameter. Some are flexible, and others are rigid. Vinyl duct, and in some situations all flexible duct, is not allowed by building codes. Also, dryers may come with the manufacturer’s specifications for ducting to use with a particular model.

How long can you run a dryer vent?

The maximum developed length of a clothes dryer exhaust duct shall not exceed 35 feet from the dryer location to the wall or roof termination. The maximum length of the duct shall be reduced 2.5 feet for each 45-degree (0.8 rad) bend, and 5 feet for each 90-degree (1.6 rad) bend.

Written by

Leave a Reply