FAQ: How To Hang Dry Erase Board On Wall?

How do you hang a whiteboard without damaging the wall?

Just get a whiteboard adhesive roll. You can make it the entire wall if you want. And you can easily remove it and reuse it in another location. You can hang whiteboard with industrial strength velcro.

Can you hang a dry erase board with Command Strips?

Stick 2 command strips together and apply to back of board 2. Add a dot of something that will wipe away later ( I used glue pen) on the paper side of the command strip 3. Press white board onto wall to let glue have contact with wall.

How do you hang something heavy on the wall?

Use a wall anchor to hang your picture or mirror on a brick wall. BobVila.com recommends a polyethylene expansion anchor. To install, use a masonry drill bit to drill a hole into the mortar where you want a hook to go. Then insert the anchor into the hole and screw the hook into the anchor.

How much weight can command strips hold?

The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.

You might be interested:  How To Post Gif On Facebook Wall?

How do you hang things without putting holes in the wall?

4 Renter-Friendly Ways to Hang Things on Your Walls

  1. Adhesive Hangers. Command strips and other adhesive-backed tapes and hooks are a renter’s best friend.
  2. Hook-and-Loop Tapes.
  3. Tapes and Vinyl.
  4. When Holes Are Unavoidable!

How do you hang a dry erase board without screws?

Letting the floor hold the weight would allow you to use a non-marring double sided foam adhesive like 3M Contact brand tape. I would use construction adhesive or epoxy to bond the stand to the whiteboard, and use the contact tape to bond the entire perimeter of the whiteboard and the stand to the wall.

Can command strips hold up mirrors?

The 3M Command™ Large Picture & Mirror Hanging Strips, holds 1.8kg for each pair of strips used and are perfect for easily wall mounting OurBoards, mirrors and pictures. No drilling and no need for a skilled maintenance person. One individual can mount the item on the wall.

Are Command Strips good for hanging pictures?

The best way to hang heavy pictures, art, painting, or anything flat to drywall, wood, glass, tile, plaster, or most other surfaces in your home is to use Command Picture Hanging Strips. The main focus of Command Brand products is hanging things to walls, and, in my view, they nailed it (pun intended).

Can you drill through dry erase board?

Drill a hole through the top and bottom of your whiteboard.



This is particularly crucial if your whiteboard has a metal frame, rather than a wooden one, as metal will not allow a screw to be drilled directly into it. Make sure you use a drill bit that matches the size of your screws.

You might be interested:  Which Is Better Goju Ryu Vs Taekwondo?

What height do you hang a whiteboard?

As a general rule of thumb, we recommend mounting your whiteboard no higher than seven feet above the base of the floor and no lower than three-feet. To be more specific, the top of a 4 x 6′ whiteboard should hang 84” off the floor; a 3 x 4′ board should be 78”, and a 2 x 3′ should hang no higher than 72”.

Written by

Leave a Reply