FAQ: How To Install Whiteboard On Wall?

How do you hang a whiteboard without putting holes in the wall?

Just get a whiteboard adhesive roll. You can make it the entire wall if you want. And you can easily remove it and reuse it in another location. You can hang whiteboard with industrial strength velcro.

How do you hang a heavy whiteboard?

Attach the whiteboard directly to the wall



You could drill through the metal frame of the whiteboard (or build a wooden frame) and screw it directly to the studs. Attach both the top and bottom of the frame, in at least 3 locations along the length of the whiteboard.

How do you hang a board without nails?

How to Hang a Noticeboard Without Nails

  1. Start by wiping the wall with a damp (but not wet) cloth to make sure it’s clean and dry before you attach anything to it.
  2. Next, tape a roll of FIX-PRO® Removable Mounting Tape and cut it to size.
  3. Now to stick your double-sided mounting tape to the back of the noticeboard.
  4. Next, remove the red plastic backing tape.
You might be interested:  Often asked: How To Build An Outdoor Wall Fountain?

Where do you hang a whiteboard?

As a general rule of thumb, we recommend mounting your whiteboard no higher than seven feet above the base of the floor and no lower than three-feet. To be more specific, the top of a 4 x 6′ whiteboard should hang 84” off the floor; a 3 x 4′ board should be 78”, and a 2 x 3′ should hang no higher than 72”.

How do you hang something heavy on the wall?

Use a wall anchor to hang your picture or mirror on a brick wall. BobVila.com recommends a polyethylene expansion anchor. To install, use a masonry drill bit to drill a hole into the mortar where you want a hook to go. Then insert the anchor into the hole and screw the hook into the anchor.

How much weight can command strips hold?

The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.

Can you hang a dry erase board with Command Strips?

Stick 2 command strips together and apply to back of board 2. Add a dot of something that will wipe away later ( I used glue pen) on the paper side of the command strip 3. Press white board onto wall to let glue have contact with wall.

How do you hang something heavy without nails?

How To Hang Heavy Frames Without Destroying the Walls

  1. Adhesive Strips: Adhesive strips aren’t only for lightweight projects.
  2. Press-in Hooks: Press-in hooks are a fast and easy way to hang very heavy objects with little damage to the wall.
  3. Drywall Anchor Studs: These are the traditional ways of hanging heavy frames.
You might be interested:  Quick Answer: How To Build A Curved Retaining Wall?

How do you get a cork board to stick to the wall?

Purchase foam mounting tape or wall adhesives from a hardware store. Look for a roll of foam tape that has adhesive on both sides, or pick out adhesives such as Command strips that will attach easily to your cork board and wall. Purchase enough of the tape or adhesive to hold the weight of the cork board.

What will stick to corkboard?

Any craft glue designed for paper, wood and fabric should stick to corkboard as well. Glues that adhere to porous materials are generally not the same glues that work best on nonporous substances, so you may need an epoxy or “super” style craft adhesive to bond metal or plastic to your corkboard.

What do you use to hang a whiteboard?

L-Clips (sometimes referred to as L-brackets or mirror mounting clips) are one of the most common pieces of hardware you’ll find accompanying a standard whiteboard. L-clips are positioned at both the top and the bottom of the whiteboard and anchor directly to the wall while simultaneously hugging the outer frame.

Can you drill through a whiteboard?

Drill a hole through the top and bottom of your whiteboard.



This is particularly crucial if your whiteboard has a metal frame, rather than a wooden one, as metal will not allow a screw to be drilled directly into it. Make sure you use a drill bit that matches the size of your screws.

Written by

Leave a Reply