- 1 How long will a railroad tie retaining wall last?
- 2 How do you anchor a railroad tie to the ground?
- 3 How much does a railroad tie retaining wall cost?
- 4 Are railroad ties illegal to use?
- 5 Will termites eat railroad ties?
- 6 What is the cheapest type of retaining wall?
- 7 Can I use railroad ties for a retaining wall?
- 8 What can I use instead of railroad ties for landscaping?
- 9 How much does a 4 foot retaining wall cost?
- 10 Can I build my own retaining wall?
- 11 Do you need drainage behind a retaining wall?
- 12 Are railroad ties bad?
- 13 Why are railroad ties soaked in creosote?
- 14 What can replace railroad ties?
How long will a railroad tie retaining wall last?
Cons: Limited life span (10 to 20 years) because timbers rot and are damaged by pests. Cannot be used to create curving walls as can concrete and stone.
How do you anchor a railroad tie to the ground?
In order to avoid potentially dangerous situations and maintain a neat and orderly appearance, it is necessary to secure old railroad ties or landscape timbers firmly in place. Burying the first row of ties and pounding ample steel spikes or lengths of rebar to hold levels of ties together effectively anchors the ties.
How much does a railroad tie retaining wall cost?
Railroad ties are the most commonly used wood for a retaining wall, and prices for this type of wall cost between $25 and $30 per square foot of wall. Untreated or soft woods are not recommended for retaining wall construction due to their susceptibility to rot and water damage.
Are railroad ties illegal to use?
A: The reason the EPA has made illegal the use of treated railroad ties in vegetable gardens is the fact that they are treated with coal tar creosote, a pesticide registered both with the EPA and the state of Oregon.
Will termites eat railroad ties?
Any wood that is on the ground in your yard will be attractive to worker termites. Termites come up from the ground to feed on any rotting wood they find. If you use railroad ties, or some other old wood as a border around your garden or flower bed, consider replacing this wood with stones.
What is the cheapest type of retaining wall?
What is the cheapest retaining wall material?
- Treated pine and is the least expensive material.
- Hardwood is more expensive than treated pine.
- Railway sleepers are another – slightly more expensive – option and are built to withstand ground and water contact.
- Concrete sleepers are more expensive.
Can I use railroad ties for a retaining wall?
A retaining wall allows you to turn a useless (for landscaping purposes) slope into a terraced, flat area. And perhaps the easiest way to build such a wall is with used railroad crossties.
What can I use instead of railroad ties for landscaping?
Pressure-treated lumber is the closest alternative to railroad ties for landscaping your garden and creating planters.
How much does a 4 foot retaining wall cost?
Retaining Wall Cost per Square Foot
|25 x 3-feet (75 sq.ft.)||$3,750|
|25 x 4–feet (100 sq.ft.)||$5,000|
|40 x 4–feet (160 sq.ft.)||$8,000|
|60 x 4–feet (240 sq.ft.)||$12,000|
Can I build my own retaining wall?
Retaining walls can be made from wood, bricks, natural stones or concrete blocks. For DIYers, it’s best to use concrete retaining wall blocks, which can be interlocking and are heavy enough to stay in place without cement or other adhesive. Interlocking blocks fit together and add extra security to the wall.
Do you need drainage behind a retaining wall?
Third, since most retaining walls are impervious, which means water cannot pass through the wall itself, efficient drainage is crucial. When drainage goes unaddressed hydrostatic pressure will build up behind the wall and cause damage such as bulging or cracking.
Are railroad ties bad?
If you’re building something complex, railroad ties might not be for you. Railroad ties are treated with creosote oil – a strong preservative made from coal and wood tar – that can make them poisonous to vegetables and a poor choice for projects where bare feet or hands might come into contact with them.
Why are railroad ties soaked in creosote?
Creosote is an oily by-product of the distillation of coal tar. Creosote treatment of railroad ties allows long term preservation of the wood which must obviously stand up to heavy pressure and harsh weather conditions.
What can replace railroad ties?
Unlike treated wood or railroad ties, paver stones and blocks will not deteriorate or leak chemicals into the soil. Plus, block retaining walls keep a neat, just-installed look. Wood ages and warps from exposure to the elements, but block garden walls stay intact for decades.