How To Do A Retaining Wall On A Slope?

Can you build a retaining wall on a slope?

When retaining walls are built, they slope slightly to one side in order to improve drainage. If the location where you‘re building the wall has an uneven slope, you‘ll need to smooth out the slope before you build the wall. Tamp the soil to compact it and provide a firmer base for the retaining wall.

How much does it cost to build a retaining wall on a slope?

The average cost of building a retaining wall is $5,636. Most homeowners find themselves spending between $3,229 and $8,670. The cost of retaining wall materials ranges from $3 to $40 per square foot. Wall block prices fall between $10 and $15 per square foot, while precase, poured concrete runs $20 to $25.

How do you install a retaining wall on a hill?

Shovel at least a 4-inch layer of gravel onto the landscape fabric. Grade this layer so it slopes 1 inch for every 4 feet, allowing water to drain away. Then lay in 4-inch perforated PVC drainpipe at the base of the wall and cover it with gravel. Shovel in backfill as you build the wall, one tier at a time.

You might be interested:  Quick Answer: How To Be A Taekwondo Master?

What is the easiest retaining wall to build?

For the average do-it-yourselfer, building a retaining wall is easiest when using masonry blocks that will be stacked no taller than three feet, with no mortar binding the stones or concrete members. (For a curved wall, mark instead with a garden hose or spray paint.)

What is the cheapest type of retaining wall?

What is the cheapest retaining wall material?

  • Treated pine and is the least expensive material.
  • Hardwood is more expensive than treated pine.
  • Railway sleepers are another – slightly more expensive – option and are built to withstand ground and water contact.
  • Concrete sleepers are more expensive.

WHY DO Retaining walls fail?

The main cause of retaining wall failure is poor drainage. Without proper drainage, hydrostatic pressure builds up behind the retaining wall. Saturated soil is substantially heavier than dry soil, and the retaining wall may not be designed to handle such a load.

How high can you build a retaining wall without a permit?

Most municipalities require a building permit and a design from a Licensed Engineer if your wall is taller than 4 feet high (measured from the bottom of the first block to the top of the last block).

What slope requires a retaining wall?

What is the slope? If the slope is greater than a 3:1, consult with an engineer. If the slope is over 2:1, it will require structures or special stabilization techniques.

How much does a 4 foot retaining wall cost?

Retaining Wall Cost per Square Foot

Size Average cost
25 x 3-feet (75 sq.ft.) $3,750
25 x 4feet (100 sq.ft.) $5,000
40 x 4feet (160 sq.ft.) $8,000
60 x 4feet (240 sq.ft.) $12,000
You might be interested:  How To Decorate A Long Wall?

Can I build my own retaining wall?

Retaining walls can be made from wood, bricks, natural stones or concrete blocks. For DIYers, it’s best to use concrete retaining wall blocks, which can be interlocking and are heavy enough to stay in place without cement or other adhesive. Interlocking blocks fit together and add extra security to the wall.

Do I need a concrete footing for a retaining wall?

No, you do not need a concrete footing, it will actually adhere the wall from being able to naturally shift. It is best to use a coarse stone aggregate for the Retaining Wall footing.

Does a 2 foot retaining wall need drainage?

Although there are exceptions, most retaining walls require gravel backfill, soil compaction, pipe or toe drains, and weep holes. Together, these four features will provide adequate drainage for most designs. Only a few types of walls will not require all of them.

How deep should the footing be for a retaining wall?

Concrete retaining wall footing size



The depth to the bottom of the base slab should be kept at a minimum of two feet. However, it should always be below the seasonal frost line, and that often is much deeper in northern climates.

Should you use fabric behind retaining wall?

A barrier behind the wall, lined in fabric and filled with gravel, creates an area for water collection and movement. The fabric helps keep the voids in the gravel from packing with silt.

Written by

Leave a Reply