How To Drywall A Curved Wall?

Can Drywall be curved?

According to the Gypsum Association, standard 1/2-inch drywall can be bent around curved framing to a radius as small as 10 feet, as long as the panels are installed with their long edges perpendicular to framing members that are spaced no more than 6 inches on center.

How do you Drywall an arch?


  1. Use drywall that is 1/2 inch thick and fasten it over the arch.
  2. Cut drywall to archway.
  3. Add more screws along the edge of the curve as needed.
  4. Repeat on the other side.
  5. Measure and place a double layer of ¼” drywall under the archway.
  6. Screw the drywall into place.

How do you install Sheetrock?


  1. Step 1: Measure the Wall “
  2. Step 2: Drive Screws Into the Drywall Sheet “
  3. Step 3: Add Additional Sheets of Drywall
  4. Step 4: Plan for Windows, Doors, Outlets and Other Fixtures “
  5. Step 5: Install Final Sheet of Drywall
  6. Step 6: Install Drywall to Reach the Floor and Frame Outside Corners “

Are archways dated?

Overdone archways

Archways inside living areas have a very dated look. A client of mine recently opened up a curved archway between the family room and kitchen by squaring it off with a contractor’s help. It was as if the same space increased in square footage by 30%.

You might be interested:  Question: How To Install A Usb Wall Outlet?

How much does it cost to put an arch in a wall?

How much does it cost to put an arch in a wall? A wall arch costs between $1,000 and $5,000 depending on the arch size and whether it is purely aesthetic or load-bearing. For very large projects, budgets will run considerably higher.

What does a coved ceiling look like?

A coved ceiling is a ceiling design that has curved edges instead of sharp angles between the ceiling and walls which are commonly found in most homes. They create a dome-like design which is reminiscent of the arched ceiling style of Middle Eastern architecture.

Written by

Leave a Reply