How To Hang Christmas Lights On A Wall?

How do you stick Christmas lights to the wall?

  1. Attach your decorating clips or gutter hooks to the surface you are decorating at regular intervals. Use a clip or hook every 30 to 50 centimetres (cm).
  2. Plug the lights in, but do not switch these on yet.
  3. Work slowly around the area you’re decorating until you reach the end of your string of lights.

How do you hang Christmas lights without damaging walls?

Stick a small adhesive decorating clip to the walls in each place you want to attach a strand of lights. To secure a vertical stretch of lights going straight up or down the wall, face the clips in alternating directions to make the arrangement more secure.

How do you hang lights on a wall without nails?

How to hang fairy lights without nails

  1. Drawing Pins. Probably the default option for many people, drawing pins (we find that brass drawing pins are often best) can be pushed between the twisted wires that often make up fairy lights, as indicated in the image below.
  2. Blu-Tack.
  3. Wrapping around household objects.
  4. Wire Suckers.
  5. Damage-free Adhesive Hooks.
You might be interested:  Question: How To Tell A Load Bearing Interior Wall?

How do you stick lights to a wall?

Use tape or tacks to secure the lights to the wall.



If you’re doing the perimeter style, secure a part of the light strand with tape or a tack and move 1–2 feet (0.30–0.61 m) across the wall with the strand. Then, secure the strand again at that point.

Do Christmas lights get hot enough to start a fire?

Christmas lights can cause fires when a socket gets overloaded or if electrical wires are faulty. The lights themselves produce some heat, but they can never get hot enough to burn anything, no matter how long they are left on.

How do you hang lights without drilling?

Use Adhesive-Backed Hooks



Just like with gutter hooks, adhesive-backed hooks can help you hang outdoor lights without using nails or drilling holes. However, you don’t hang these off the lip of a gutter or other surface. Instead, you either peel the back or apply adhesive to the hook and pin it onto a flat surface.

How can I hang Christmas lights without clips?

Tape. Using tape is an easy way to get your Christmas lights up, and many people do it this way. However, it can be a safety hazard and won’t last long. Depending on your Christmas lights‘ size and weight, tape won’t usually hold it up for the couple of months they should be on display.

How do you hang lights on a concrete wall?

So to attach rope lights to concrete while you could use the Scotch Outdoor Mounting Tape, a better, more long-term solution will be to drill holes in the concrete and use screw-on clamps. First, hold the rope against the concrete where you want it to go.

You might be interested:  Quick Answer: How To Prep A Painted Wall For Tile?

Do Command Hooks damage walls?

One click tells you Picture Hanging Strips are locked in and holding tight. Best of all, when you are ready to take down or move your pictures, they come off cleanly—no nail holes, cracked plaster or sticky residue. Learn the proper way to remove Command™ Picture Hanging Strips so they won’t damage your wall.

How do you hang LED lights on a wall?

How to Hang Rope Lights in 7 Simple Steps

  1. Decide Where You Want to Hang Your Lights.
  2. Figure Out How Much Rope Lighting You Need.
  3. Install Plastic Cable Clips.
  4. Place the Rope Inside the Clips.
  5. Nail Down Your Cable Clips.
  6. Plug in Your Rope Lights.
  7. Turn on Your Lights and Enjoy!

How do you hang lights on a textured wall?

On textured walls, pick up a pack of 3M Pads and stick them to the back of the strip. These do not hold up well because it just has an adhesive strip on the backing and it has no cushion. The 3M sticky pads are nice because they’ll cushion and help adhere on all the bumps like the LED strips won’t.

Does sticky tack ruin walls?

If the paint on your walls is too thin, it may peel off with the Blu Tack, and if the wall surface is at all porous, oils from the adhesive can seep into it. Careful cleaning can generally take care of these blue stains and leave the walls unblemished. Click to see full answer.

Written by

Leave a Reply