How To Install Hand Railing On Wall?

What side of the wall does a handrail go on?

From ground floor to first floor the wall mounted handrail is on the LEFT, From first floor to second floor the handrail with the balustrade is on the RIGHT.

How do you install a handrail?


  1. First End of Railing: Determine Height.
  2. Mark Drill Points on Bracket.
  3. Drive Screws to Hold Handrail Bracket.
  4. Attach the Railing With Sleeve.
  5. Second End of Railing: Measure Height.
  6. Screw Second Bracket in Place.
  7. Determine Dip With Your Chalk Line.
  8. Elevate the Railing to Height of Chalk Line.

Where should handrail brackets be placed?

Buy enough brackets to install two at the top, one at the bottom and one every 48 in. between the top and the bottom of the stair railing.

How many brackets do I need for a handrail?

Remember, you will need a bracket every 4′. So, for example, if you had an 8′ handrail, you would need three handrail brackets — one at the top, one in the middle, and one at the end of the 8 feet of handrail. And don’t forget, avoid installing handrail brackets at handrail joints.

You might be interested:  Question: What Is The Highest Belt In Aikido?

Is it illegal not to have a handrail on stairs?

Stairs should have a handrail on at least one side if the stairs are less than 1 metre wide. You do not need a handrail on the first two bottom steps. In all buildings, handrail height should be between 900mm and 1000mm measured from the pitch line to the top of the handrail.

Do I need a handrail for 3 steps?

Do I need stair railing? If your home has three or fewer steps, there’s no need to install a handrail. However, homes having four or more stairs must have a rail mounted on at least one side if the stairway is less than 44 inches wide.

Is a handrail required for 3 steps?

Building Codes

The building code does not refer to the number of “steps” but it does require a handrail when there are two or more “risers”. For clarification, a “riser” is the vertical portion of a stair. The “tread” is the top of a step. A two riser minimum would translate to two steps.

Do handrails have to return to the wall?

Handrail extensions must return to a wall, itself or the walking surface. Note: While it is a common practice to leave a gap between a wall return and the wall, some inspectors have rejected this as they consider it a return toward the wall and not a return to the wall.

How much does railing installation cost?

Average Cost to Install Railing

Average Cost $900
High Cost $10,000+
Low Cost $700

How far should a handrail be from the wall?

Terminology: Stair Railing and Stair Guards

You might be interested:  Readers ask: What Country Has Ancient Dynasties And Wushu?
Stair Railing Building Code
Handrail Height 34 to 38 inches
Maximum Projection of Railing From Wall 4-1/2 inches
Minimum Hand Clearance From Wall 1-1/2 inches
Minimum Distance Between Two Railings 27 inches

Written by

Leave a Reply