- 1 Can I use railroad ties for a retaining wall?
- 2 How long do railroad tie retaining walls last?
- 3 Are railroad ties illegal to use?
- 4 How much does a railroad tie retaining wall cost?
- 5 What is the cheapest retaining wall to build?
- 6 Will termites eat railroad ties?
- 7 What can I use instead of railroad ties for landscaping?
- 8 Do you need drainage behind a retaining wall?
- 9 Why do railroad ties last so long?
- 10 Are railroad ties bad?
- 11 How much does an 8 foot long railroad tie weigh?
- 12 Why are railroad ties soaked in creosote?
- 13 How much does a 4 foot retaining wall cost?
- 14 Can I build my own retaining wall?
- 15 How long will pressure treated retaining wall last?
Can I use railroad ties for a retaining wall?
A retaining wall allows you to turn a useless (for landscaping purposes) slope into a terraced, flat area. And perhaps the easiest way to build such a wall is with used railroad crossties.
How long do railroad tie retaining walls last?
A railroad tie retaining wall can last up to 40 years in a dry climate, maybe only 15 in a wet one, depending how its treated. Stone retaining walls last forever – but they are a lot more expensive and difficult to construct.
Are railroad ties illegal to use?
A: The reason the EPA has made illegal the use of treated railroad ties in vegetable gardens is the fact that they are treated with coal tar creosote, a pesticide registered both with the EPA and the state of Oregon.
How much does a railroad tie retaining wall cost?
Railroad ties are the most commonly used wood for a retaining wall, and prices for this type of wall cost between $25 and $30 per square foot of wall. Untreated or soft woods are not recommended for retaining wall construction due to their susceptibility to rot and water damage.
What is the cheapest retaining wall to build?
What is the cheapest retaining wall material?
- Treated pine and is the least expensive material.
- Hardwood is more expensive than treated pine.
- Railway sleepers are another – slightly more expensive – option and are built to withstand ground and water contact.
- Concrete sleepers are more expensive.
Will termites eat railroad ties?
Any wood that is on the ground in your yard will be attractive to worker termites. Termites come up from the ground to feed on any rotting wood they find. If you use railroad ties, or some other old wood as a border around your garden or flower bed, consider replacing this wood with stones.
What can I use instead of railroad ties for landscaping?
Pressure-treated lumber is the closest alternative to railroad ties for landscaping your garden and creating planters.
Do you need drainage behind a retaining wall?
Third, since most retaining walls are impervious, which means water cannot pass through the wall itself, efficient drainage is crucial. When drainage goes unaddressed hydrostatic pressure will build up behind the wall and cause damage such as bulging or cracking.
Why do railroad ties last so long?
Railroad ties last a long time for the railroad because they’re sitting on gravel, and on elevated beds of earth where water normally won’t stand for very long. Also, don’t just stack the ties. You HAVE to use some dead-men sticking back perpindicular to the wall.
Are railroad ties bad?
If you’re building something complex, railroad ties might not be for you. Railroad ties are treated with creosote oil – a strong preservative made from coal and wood tar – that can make them poisonous to vegetables and a poor choice for projects where bare feet or hands might come into contact with them.
How much does an 8 foot long railroad tie weigh?
You should go straight to Google for answers, that’s where the above answer came from. “Railroad ties are rectangular timbers that measure approximately 8 feet 6 inches long, are 9 The majority of railroad ties weigh close to 200 pounds. “
Why are railroad ties soaked in creosote?
Creosote is an oily by-product of the distillation of coal tar. Creosote treatment of railroad ties allows long term preservation of the wood which must obviously stand up to heavy pressure and harsh weather conditions.
How much does a 4 foot retaining wall cost?
Retaining Wall Cost per Square Foot
|25 x 3-feet (75 sq.ft.)||$3,750|
|25 x 4–feet (100 sq.ft.)||$5,000|
|40 x 4–feet (160 sq.ft.)||$8,000|
|60 x 4–feet (240 sq.ft.)||$12,000|
Can I build my own retaining wall?
Retaining walls can be made from wood, bricks, natural stones or concrete blocks. For DIYers, it’s best to use concrete retaining wall blocks, which can be interlocking and are heavy enough to stay in place without cement or other adhesive. Interlocking blocks fit together and add extra security to the wall.
How long will pressure treated retaining wall last?
Pressure-treated timbers are typically what you use for a timber retaining wall. The fun fact about pressure treated wood is that it is warrantied – but putting it in continuous contact with the ground voids the warranty. Even so, you can reasonably expect to get anywhere from 10-20 years out of a timber wall.