- 1 How do you install Versa-Lok caps?
- 2 Do I need to glue my retaining wall blocks?
- 3 Do all retaining walls need drainage?
- 4 How many Versa Lok do I need?
- 5 How big is a Versa Lok block?
- 6 How do you cut brick without a saw?
- 7 How much does a Versa Lok block weight?
- 8 What is the best adhesive for retaining wall blocks?
- 9 What is the cheapest type of retaining wall?
- 10 What is the easiest retaining wall to build?
- 11 What is the best base for a retaining wall?
- 12 Should you use fabric behind retaining wall?
- 13 Do you need a French drain for a retaining wall?
How do you install Versa-Lok caps?
Clear off any debris or dust. Place two continuous, 1/4-inch beads of VERSA–LOK Concrete Adhesive on the wall units to be capped (Figure 6). Set the prepared group of cap units in place and press them firmly into the adhesive. Adjust caps as needed.
Do I need to glue my retaining wall blocks?
You don’t have to use an adhesive for gravity wall units, but it’s a great precaution. I would consider putting a dab of glue on every other or every third block, mostly on the last couple of courses. I always clue my top course if I dont have caps, and if I do have caps, I always glue my caps. It’s safer.
Do all retaining walls need drainage?
Although there are exceptions, most retaining walls require gravel backfill, soil compaction, pipe or toe drains, and weep holes. Together, these four features will provide adequate drainage for most designs. Only a few types of walls will not require all of them.
How many Versa Lok do I need?
Versa–Lok Wall Estimating:
Multiply square feet of wall times 1.5 stones per sq. ft. This is the number of Versa–Lok standard stones you need.
How big is a Versa Lok block?
Panels are 10″ high and 24″ long. Cap units can put the finishing touch on your VERSA–LOK wall. Block caps are available in all block colors as well as hickory and charcoal. 1/3 sq.
|Face Area||2/3 sq. ft.|
How do you cut brick without a saw?
Place the brick on the ground or a sand bed, both of which have some give that will deaden the hammer blows. Score the cutline by tapping a cold chisel gently at about a 60-degree angle; striking straight on or with a full swing could prematurely split the brick and leave an uneven break.
How much does a Versa Lok block weight?
|Setback:||3/4″ per unit|
What is the best adhesive for retaining wall blocks?
Loctite® PL® Landscape Block Adhesive is the ideal adhesive for these projects. The blocks used in wall systems are interlocking. Using an adhesive to bond each unit together and attach the capstone creates a strong connection between the individual units and prevents sliding and bulging of the wall.
What is the cheapest type of retaining wall?
What is the cheapest retaining wall material?
- Treated pine and is the least expensive material.
- Hardwood is more expensive than treated pine.
- Railway sleepers are another – slightly more expensive – option and are built to withstand ground and water contact.
- Concrete sleepers are more expensive.
What is the easiest retaining wall to build?
For the average do-it-yourselfer, building a retaining wall is easiest when using masonry blocks that will be stacked no taller than three feet, with no mortar binding the stones or concrete members. (For a curved wall, mark instead with a garden hose or spray paint.)
What is the best base for a retaining wall?
Due to soil erosion, your retaining wall should be built on a solid foundation made from gravel.
- Choose gravel that has stones sized between 1/2-inch and 3/4-inch.
- Fill the trench with a 2- to 3-inch layer of gravel.
- Use a rake to ensure the stones are evenly distributed.
Should you use fabric behind retaining wall?
A barrier behind the wall, lined in fabric and filled with gravel, creates an area for water collection and movement. The fabric helps keep the voids in the gravel from packing with silt.
Do you need a French drain for a retaining wall?
If you‘re building a retaining wall, add a French drain behind the first course of stones or blocks. Otherwise, water moving down the hill will build up behind the wall and undermine it. The pipe should rest on the same compacted gravel base or concrete footing that supports the wall.