Lowes How To Build A Retaining Wall?

What is the easiest retaining wall to build?

For the average do-it-yourselfer, building a retaining wall is easiest when using masonry blocks that will be stacked no taller than three feet, with no mortar binding the stones or concrete members. (For a curved wall, mark instead with a garden hose or spray paint.)

How do you build a retaining wall step by step?

Step by Step: How to build a retaining wall

  1. Dig a level-bottomed trench wide enough for the base stones to fit into. Compact the bottom of the trench with a hand tamper.
  2. Lay landscape fabric in the trench.
  3. Start the wall’s second layer using a staggered pattern.
  4. Make sure the wall is level.

Can I build a retaining wall myself?

While retaining walls taller than four feet should be engineered by professionals, you may be able to DIY a solution for a tall slope by creating two or more shorter “tiered” retaining walls as opposed to a single tall wall.

How deep should the footing be for a retaining wall?

Concrete retaining wall footing size



The depth to the bottom of the base slab should be kept at a minimum of two feet. However, it should always be below the seasonal frost line, and that often is much deeper in northern climates.

You might be interested:  Often asked: How To Insulate A Basement Wall?

What is the cheapest retaining wall to build?

What is the cheapest retaining wall material?

  • Treated pine and is the least expensive material.
  • Hardwood is more expensive than treated pine.
  • Railway sleepers are another – slightly more expensive – option and are built to withstand ground and water contact.
  • Concrete sleepers are more expensive.

What is the best retaining wall?

Concrete and Masonry Retaining Walls



Poured concrete is the strongest and most durable choice for retaining walls. It may also be carved and formed to look like mortared stone depending on your taste.

Do I need drainage behind retaining wall?

Third, since most retaining walls are impervious, which means water cannot pass through the wall itself, efficient drainage is crucial. When drainage goes unaddressed hydrostatic pressure will build up behind the wall and cause damage such as bulging or cracking.

How high can you build a retaining wall without a permit?

Most municipalities require a building permit and a design from a Licensed Engineer if your wall is taller than 4 feet high (measured from the bottom of the first block to the top of the last block).

Does a 2 foot retaining wall need drainage?

Although there are exceptions, most retaining walls require gravel backfill, soil compaction, pipe or toe drains, and weep holes. Together, these four features will provide adequate drainage for most designs. Only a few types of walls will not require all of them.

How much does it cost to build retaining wall?

The average cost of building a retaining wall is $5,636. Most homeowners find themselves spending between $3,229 and $8,670. The cost of retaining wall materials ranges from $3 to $40 per square foot. Wall block prices fall between $10 and $15 per square foot, while precase, poured concrete runs $20 to $25.

You might be interested:  Quick Answer: How To Remove Wallpaper Paste From Wall Before Painting?

How long do retaining walls last?

How long will my retaining wall last? For a permanent wall structure, the general lifespan is generally between 50 and 100 years. This does, however, depend on the conditions of the soil and groundwater at your site.

How thick do retaining walls need to be?

Rules of thumb commonly used by designers to establish the geometry of the wall include (refer to diagram): Base width = 1/2 to 1/3 of the height of the wall. Base thickness = 1/8 of the height of the wall but not less than 12 inches. Stem thickness = 6 inches + ¼ inch for each foot of wall height.

Written by

Leave a Reply