Often asked: How To Arrange Plates On A Wall?

How do you arrange decorative plates on the wall?

How to Hang Plates on a Wall

  1. Select the plates you want to hang on the wall.
  2. Lay white paper on a flat surface.
  3. Using painters tape (so as not to damage your walls) place the paper “plates” where you want them to hang.
  4. Make sure that the back of the plate is very clean – free of dust and lint.

How do you arrange 4 plates on a wall?

  1. Step 1: Arrange your plate layout. Determine how many plates you’d like to hang and how they look best.
  2. Step 2: Trace the plates onto paper. Use a pencil to trace outlines of each plate on a large piece of kraft paper.
  3. Step 3: Tape the templates to your wall.
  4. Step 4: Hang the plates on picture hangers.

Can you hang plates with Command Strips?

If you‘re not concerned with removing the plate hanger, a more affordable method is using a paperclip and super-glue to create an invisible hook on the back of the plate. Another invisible plate hanger idea is to use 3M command strips. I have the best luck and most staying power with the velcro kind.

You might be interested:  Often asked: How To Clean A Chalkboard Paint Wall?

How do you use a plate hanger adhesive?

To avoid covering writing on the back of your plate, use two smaller hangers attached to the lips of the plate. String picture hanging wire between these two smaller hangers, and then attach the plate to a picture hook on the wall. Make sure the two hangers support the weight of the plate.

How does a plate hanger work?

The key to working with these hangers is to bend the top of the hanger so that your plate will lay flat on the wall once hung. The best way to do this is to first attach the plate hanger to the plate and lie the plate on a flat surface. Once all of your plates have hangers, it’s time to get them up on the wall!

What size plate hanger do I need?

We generally say that a plate stand should be at least 3/4″ of the height of the item you are displaying. So if you have a 10″ plate, you will want a stand that is at least 7 1/2″ tall. Or if you have a 12″ plate, you will want a stand that is at least 9″ tall. You can always go with a larger stand too.

How do you decorate a plate?

Method 1 of 3: Decorating with Permanent Marker Ink

  1. Clean the plate with rubbing alcohol and a paper towel.
  2. Draw designs on the plate using permanent marker oil pens.
  3. Erase mistakes right away with rubbing alcohol.
  4. Bake the plate at 350 °F (177 °C) for 30 minutes.
  5. Cool the plate in the oven for at least 30 minutes.
You might be interested:  How To Techniques Aikido?

How do you display plates on a shelf?

Set the rack on the shelf and arrange the plates from biggest to smallest.

  1. Make sure the plates are facing out towards the front of the cabinet.
  2. If your plates have a pattern or picture in the center, stand them in the rack so that the design is rightside up.

How do you hang something heavy?

Hanging Something Heavy on Brick/Masonry



Use a wall anchor to hang your picture or mirror on a brick wall. BobVila.com recommends a polyethylene expansion anchor. To install, use a masonry drill bit to drill a hole into the mortar where you want a hook to go.

Written by

Leave a Reply