Often asked: How To Attach Peg Board To Wall?

Can you Mount pegboard on drywall?

Pegboard goes up pretty easily and can be installed over drywall or even bare studs (such as in an unfinished garage). The trick to installing it is to create a 1/2-inch or larger gap between the wall and the back of the pegboard.

How do you hang pegboard on drywall?

  1. Use a stud finder or other means to locate the studs behind the drywall.
  2. Using a level to ensure a 90-degree angle, hold the pegboard in place on the wall – you may need a friend to assist.
  3. Drive screws through pegboard and furring strips at all four corners, aligned with the studs, to leave marks for pilot holes.

How far should pegboard be from the wall?

Pegboard needs about 1/2 in. of ‘standoff’ space behind it so the hooks can be inserted. Plastic and metal pegboard panels have this space built in, created by the L-shape flanges at the edges.

What is furring strips used for?

In construction, furring (furring strips) are thin strips of wood or other material to level or raise surfaces of another material to prevent dampness, to make space for insulation, or to level and resurface ceilings or walls. Furring refers to the process of installing the strips and to the strips themselves.

You might be interested:  Quick Answer: How To Hang Heavy Wall Art?

Are furring strips necessary?

Whether it’s the ceiling or the walls, furring strips are essential to ensuring that you’ll always get a flat and smooth surface when the project is complete. When applying furring strips to your walls, they will have to be directly screwed or nailed into the wood or concrete wall.

How thick are furring strips?

Every piece of 1 in. x 2 in. x 8 ft. Furring Strip Board is perfect for a wide range of uses including carpentry, hobbies, shelving and general finish work.

How much weight can pegboard hold?

How much weight can a pegboard hold? According to a quick search on google, a pegboard can hold 100 pounds if properly installed.

How do you install drywall anchors?

How to Use a Drywall Anchor

  1. With a pencil, mark the point where you want to hang whatever it is you’re trying to hang.
  2. Drill/make a pilot hole.
  3. Stick the anchor in the pilot hole and tap it into place until the head of the anchor flushes up with the wall.
  4. Use a screwdriver to set the screw.

Will Home Depot cut pegboard?

Home Depot does cut your wood, or pegboard, or whatever else you need. Measure and mark the pegboard for the correct length and width. Cut the pegboard, following your measurement marks, using a circular saw, jigsaw or table saw.

Can you hang a pegboard with Command Strips?

Prepare the command strips.



I recommend that you use the 16 lb Command strips to hang your IKEA pegboard. Separate strips by tearing the pieces apart, do not fold. Line up two strips and click them together. You‘ll need six sets for the bar and one set for each spacer.

You might be interested:  Readers ask: How To Stick Pictures On Wall Without Nails?

What do I need to hang a pegboard?

Mount Pegboard



Mount the pegboard to the wall studs or furring strips using lathe screws (Image 1). Normal drywall or wood screws will work, however, the large washer head of lathe screws will help prevent tear-through when mounting heavy items. Tighten the screws snug but don’t over drive and break the pegboard.

Written by

Leave a Reply