Often asked: How To Build A Bookshelf Wall?

Is it cheaper to buy or build a bookshelf?

So one DIY bookcase would’ve cost me about the same price as the laminate one, but I would still own that same bookcase! When you’re comparing DIY furniture to furniture from other stores that is built to last, there is almost no competition: DIY will be cheaper 99% of the time.

How do you build a bookshelf in a wall?

Library wall to wall bookcasesBookcase Plans

  1. Materials: 3/4″ plywood or MDF.
  2. Step 1: Mark and Drill. Mark location for fixed shelves and drill shelf pin holes for adjustable shelves.
  3. Step 2: Install fixed shelves to one side.
  4. Step 3: Attach second side.
  5. Step 4: Install cleats.
  6. Step 5: Attach back.
  7. Step 6: Build Cabinet Base.
  8. Step 7: Configure and Install Bookcases.

How much does it cost to build built-in bookshelves?

Cost of Built-In Bookcases



The cost to have built-in bookshelves installed averages $2,594 or between $1,251 and $3,938 for a carpenter to do the job. If you buy the materials yourself, you can usually get a handyman to install them for $30 to $130 per hour.

You might be interested:  Readers ask: Who Taught Morgan Aikido?

Is it cheaper to build your own shelves?

DIY Pros and Cons



Building your own shelves can be beneficial for some, but may not be the right choice in every situation. Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time.

How can I make a cheap bookshelf?

Cheap Bookshelves Ideas

  1. Use simple box to store knowledge.
  2. One strap of leather and a plank can shine.
  3. Sculpt a bookshelves with drawers.
  4. Reshape a plane bookshelves with wooden textures.
  5. Scale wooden boxes into a timeless piece.
  6. Plant crown molding on simple bookshelves.
  7. Pick the right pattern to emphasize your library.

How long does it take to build a bookshelf?

At the end of this article, in “Additional Information,” you’ll find lists of the tools and materials you’ll need to complete this project. Even though this project isn’t complicated, it’s still going to take you at least 40 hours to build. A bookcase or shelf is an extremely useful home storage system.

How do you secure a built in shelf to the wall?

Attach the shelf to the wall by drilling pilot holes through the back corner and into wall studs, then toenailing the shelf to the wall with screws. Don’t drill through the inside of the bookshelf.

How deep should a built in bookcase be?

How Deep Should Built in Shelves Be? Take stock of what you’ll be storing on them: trim travel guides or oversize art books, bulky board games or lidded baskets, collectibles large or small. Most shelves are built a minimum of 11 to 12 inches deep, but this is your chance to customize: Go for it!

You might be interested:  Often asked: How To Remove Double Sided Foam Tape From Wall?

What kind of wood should I use for a bookshelf?

Most lumberyards stock the basics: birch, maple, and oak veneer plywoods. Birch is the best wood to use if you plan to paint your bookcase, and maple lends itself to a variety of stains.

Do Built in bookshelves increase home value?

The added storage space from a built in storage unit should increase the home’s value, as long as it is appropriate to the function of the room, is high quality, and is flexible enough to accommodate the next homeowner’s storage needs.

Why are built ins so expensive?

Very simply, there is a lot of labor that goes into producing a high-quality painted finish. Compared to 2-3 coats of a high quality clear lacquer that can be applied in as little as one day, the additional labor costs easily offset the savings of less expensive, “paint grade” materials.

What is the cheapest wood for shelves?

What is the cheapest wood for shelves?

  • Pine. Pine is one of the most affordable and popular softwoods in the market.
  • Plywood. Plywood is another good option for people who are interested in making their own shelves.
  • Cherry. Although cherry is a hardwood, it is lightweight and easy to use.
  • Koa.
  • Red Oak.
  • Paduak.
  • Mahogany.

How thick should Wood be for shelves?

Thick Wood Bookshelves



Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.

You might be interested:  Where To Buy Large Wall Clocks?

How do you build wall shelves without brackets?

  1. Step 1: Build Shelf Frame. So, the first thing I did was cut down my boards into useful sizes.
  2. Step 2: Cut Wall Shelves to Size.
  3. Step 3: Add Edges Around Wall Shelves.
  4. Step 4: Finish Shelves as Desired.
  5. Step 5: Attach Shelves to Frame and Hang on Wall (WITHOUT Brackets)

Written by

Leave a Reply