Often asked: How To Find A Wall Stud Without Stud Finder?

What can I use if I don’t have a stud finder?

Look at the Trim



The baseboards in your home are attached to the studs. Check your baseboards to see if you can spot where it might have been nailed. These holes (commonly known as dimples) are usually painted over and filled with caulk. Despite this, you may be able to see one to locate a stud.

How can you tell where a stud is in the wall?

A good starting place is 16 inches from a corner. For better precision, use a tape measure and mark 12 inches, 16 inches, and 24 inches from the corner. Tap the wall at each distance. You’ll hear a solid sound when you tap the part of the wall that is supported by a stud.

Can I use my iPhone as a stud finder?

The iPhone beeps when its magnetometer, in the upper right of the phone, is near metal. Stud Find is an iPhone application that uses the device’s built-in magnetometer to find metal studs, screws, nails and anything metallic in a wall.

You might be interested:  Often asked: How To Hang The Us Flag On A Wall?

How do you make sure you found a stud?

Make a fist and knock on the wall with your knuckles. In some places, you‘ll hear a hollow sound. Other areas will sound more “solid.” The “solid” sound indicates you have knocked on a stud. Studs are located about 16 to 24-inches apart.

Why do stud finders never work?

Most magnet type stud finders don’t work effectively since they are dependent on locating the fasteners (screws) used to secure the drywall and they can be very difficult to locate.

What is the best stud finder app?

Top 20 Stud Finder Apps For Android And iOS

  • Stud Detector. Stud Detector is one of the best stud finder app for android users which allows you to easily ind metal framing studs.
  • Stud Find.
  • Real metal detector with sound.
  • Wall Stud Finder.
  • Stud Detector by Guylyhey.
  • Metal Detector.
  • Metal Detector.
  • Toolbox.

How far apart are wall studs?

The general spacing for wall studs is 16 inches on center, but they can be 24 inches.

Are studs always 16 apart?

Why You Should Find Studs



They’re always spaced either 16 or 24 inches on-center (measured from center to center) along the wall and run between the floor and ceiling. Drywall or lath (for plaster walls) attaches to the edge of the studs.

Can you mount a TV without studs?

Can you mount a TV without studs? You can mount a TV without studs using anchors, toggle anchors, mounting plates, ceiling mounts, and other mounting options. Of course, you have to keep your TV’s size and weight in mind and choose the right option.

You might be interested:  Question: How To Make A Wall Cabinet?

Can you download a stud finder?

Stud finder app for iOS and Android brings the simplicity and effectiveness of a real stud detector tool to your iPhone or Android device. The app uses your device’s compass (magnetometer sensor) to pinpoint metal studs, nails, and screws embedded in all wood wall studs.

Is there a free stud finder app for iPhone?

The highly-rated Smart Metal Detector is a great stud finder option for iOS devices. It is free, but will offer in-app purchases.

Is there a stud finder that actually works?

If you’re hanging heavy pictures, mirrors, or shelves, you need to know where your wall studs are—and the best tool we found for the job is the C.H. Hanson 03040 Magnetic Stud Finder.

Is it bad to drill into a stud?

Drilling a hole in a stud for wiring will weaken the stud – by how much is a function of the size of the hole drilled and where the hole is drilled in the stud. From an electrical perspective drill the hole in the center of the stud and make the hole just big enough that you can easily pull the wire through it.

Is it OK to drill into a stud?

You should not drill or screw deeper than one inch into a stud since electrical wires are typically run through the center of a stud. Another advantage of drilling a pilot hole instead of running a screw straight in is that if you miss the stud a small pilot hole is quicker and easier to repair.

Do I have to drill into a stud?

If you’re hanging shelves or mounting anything heavy to the wall, you’ll probably want to mount it directly to the wall studs. However, you should be drilling pilot holes first before driving in any screws.

Written by

Leave a Reply