Often asked: How To Frame A Wall On Concrete Basement?

How do you make concrete basement walls look good?

Paint Your Cinder Block

Basement walls of cinder block, brick, or even poured concrete can be transformed pretty quickly and simply with a coat of paint. Go for a solid color, or get wild and design a mural to brighten up that subterranean space of yours.

How do you frame a wall with concrete?

Framing a wall against the concrete allows you to add paneling or drywall for a finished look, more like a home than a cell. If space is a consideration, attaching furring strips over either rigid foam or a vapor barrier, spaced 16 inches apart vertically just like studs, is probably the best option.

How do you cover a cinder block basement wall?

The simplest way to cover a cinder block wall is by using surface bonding cement to create a concrete finish. Concrete helps insulate the building and keep moisture out. It creates a smooth, finished surface you can leave as is or paint.

You might be interested:  Question: How To Build A Donut Wall?

Should you put plastic on basement walls?

Should I use visqueen or plastic sheeting on the framed basement walls? No you should not, as plastic will prevent moisture from moving through the wall and will lead to mold and damage.

What is the cheapest way to finish a basement?

How To Finish A Basement On A Budget – 8 Tips

  1. Start Small—But With Flair. When people use up their budget on finishing the entire basement, the result may look bland, says Leah Smith of Ohio-based contractor Buckeye Basements.
  2. Keep It Dry.
  3. Get Creative With Flooring.
  4. Don Your Painting Clothes.
  5. Change It Up.
  6. Choose Your Ceiling.
  7. Clear The Air.
  8. Check The Codes.

Should you put a vapor barrier on basement walls?

Vapor barriers should be located on the exterior of basement assemblies allowing inward drying to the basement space where moisture can be removed by ventilation or dehumidification.

Can I frame with 2×3?

Most wall framing is done with 2×4 or 2×6 lumber, but it may be possible to use 2×3’s to build a new, non-load bearing, interior wall. By code, 2×3’s may be used for this purpose if the wall is no taller than 10 feet and the studs are spaced every 16 inches. In addition, electrical boxes won’t fit in a 2×3 wall.

Can you put drywall directly on concrete?

You can glue drywall sheets to a concrete block wall. Drywall is usually attached to wall studs with 2-inch drywall screws using an electric drill with a driver bit installed. You can glue drywall to the interior of concrete block walls using a straightforward procedure.

You might be interested:  FAQ: How To Cut Concrete Block Wall?

How can I cover my basement walls cheaply?

Another unexpected and low-cost alternative wall material is an engineered lumber such as oriented strand board. OSB, which is typically used for subfloors or sheathing in construction — making it an unconventional choice for walls — is acreative, less expensive way to cover your concrete walls and divide living zones.

Can you put wallpaper on concrete walls?

Wallpaper will adhere to drywall, new and old plaster, concrete, masonry, and paneling. You can even wallpaper over slick, nonporous surfaces, such as tile, concrete block, or synthetic laminate paneling.

What can I use instead of drywall in my basement?

Plastic paneling is very easy to install, making it an easy drywall alternative to recommend. You can simply screw most plastic paneling into place and you will be able to cover up walls directly.

  1. Wood Planks.
  2. Plastic Panels.
  3. Plywood.
  4. Veneer Plaster.
  5. Pegboard.
  6. Lath and Plaster.
  7. Wahoo Walls.
  8. Textured Wall Panels.

What is the best wall covering for a basement?

If installing drywall panels, use moisture- and mildew-resistant drywall. When insulating concrete basement walls (a good idea because concrete basement walls are often cold), use rigid foam board insulation if the insulation will come into direct contact with the concrete wall.

Should I Drylock basement walls before finishing?

NO, drylock will not do anything as to keeping water from coming through a crack, hole or any direct opening that is or may arise on the outside of your home in future.it is impossible for any paint to stop water from entering through a wall or from water entering through windows, tuckpointing needs etc.

You might be interested:  FAQ: How To Build Block Retaining Wall?

Do you need a vapor barrier on concrete?

You‘ll typically need a vapor barrier if you‘re installing flooring over concrete. In high-humidity areas, moisture will move to a relatively low-humidity area, even through concrete. This way you can stop the vapor drive of water upward to your floors, protecting them from any damage (source).

Written by

Leave a Reply