Often asked: How To Paint Checkerboard Pattern On Wall?

How do you paint a checkerboard floor pattern?

How To Paint A Checkerboard Floor

  1. Materials: Semigloss or latex paint, triangle and straight-edge rulers, chalk or painter’s tape and a small sponge roller.
  2. Step 1: Select two complementary shades of paint.
  3. Step 2: Paint the entire floor with two coats of the lighter color and let dry completely.
  4. Step 3: Map out grid.
  5. Step 4: Apply darker shade.

How do you paint a checkered flag on a wall?

With a project this budget friendly and easy to do, there’s no excuse for plain walls.

  1. Step 1: Apply base coat. Add base coat to your wall and allow it to dry.
  2. Step 3: Apply top coat. Using your second paint brush, apply your top coat to your now taped wall.
  3. Step 4: Remove the tape. Remove the tape one strip at a time.

How do you make a checkerboard pattern?


  1. Draw a horizon line.
  2. Place a mark on the picture plane line to position the corner of the checkerboard.
  3. Connect the “corner mark” and 8 marks to the left with the right vanishing point.
  4. Connect the “corner mark” and 8 marks to the right with the left vanishing point.
  5. The checker-board grid is done!

Can I paint my floor with wall paint?

If you think you can paint floors with regular wall paint, you’re sadly mistaken. Paint manufacturers offer super durable porch and floor paint products and sealers that will keep your painted floors, well, painted.

You might be interested:  Often asked: How To Build A Knee Wall Door?

What do you seal a painted floor with?

If you want the floor to attain a weathered look, leave the painted finish unprotected so scuff marks will build up over time. For a protected finish, seal the painted floor with two coats of water-based matte-finish polyurethane.

How do you paint plaid nails?


  1. Decide which nails will be red or green.
  2. Paint two horizontal stripes with a nail polish brush.
  3. Paint one vertical stripe over the horizontal ones.
  4. Take a detailing nail art brush and draw the black squares where the lines cross each other.
  5. Use a thin nail art brush to draw fine white lines as pictured.

What is the standard size of a checkerboard?

Most commonly, it consists of 64 squares (8×8) of alternating dark and light color, typically green and buff (official tournaments), black and red (consumer commercial), or black and white (printed diagrams). An 8×8 checkerboard is used to play many other games, including chess, whereby it is known as a chessboard.

Written by

Leave a Reply