Question: How To Build A Basement Wall Against Concrete?

How do you make concrete basement walls look good?

Paint Your Cinder Block



Basement walls of cinder block, brick, or even poured concrete can be transformed pretty quickly and simply with a coat of paint. Go for a solid color, or get wild and design a mural to brighten up that subterranean space of yours.

What is the cheapest way to finish a basement wall?

Paneling can be used as an inexpensive way to finish you basement walls or ceiling. Use a strong adhesive to put strips of wood on your concrete basement walls, and then use wood screws that match your paneling to attach the paneling to the wood strips.

How far should studs be from basement wall?

Be sure to maintain the 16-inch on-center stud spacing, and check the wall frame to make sure it’s plumb before nailing it to the beam.

You might be interested:  How To Fix Towel Rack Pulls Out Of Wall?

Is framing a basement hard?

Framing basement walls is the first phase of learning how to finish a basement. I do love the smell of lumber dust on a cool fall morning. Don’t worry, it’s not as hard as it looks, but it’s one of the steeper learning curves.

Do you need vapor barrier in basement walls?

It provides the best coverage and R-value and and functions as a moisture barrier in and of itself. But if you use fiberglass insulation batts, then a moisture barrier will prevent water and moisture from entering your walls and creating mold and mildew.

What can I cover my basement walls with?

Fortunately, you can cover basement foundation walls quickly and inexpensively. Attach wood furring strips, Z-shape channels, or 2×4 studs to flat, dry masonry walls, then add insulation and cover the strips or studs with drywall.

Should you put plastic on basement walls?

Should I use visqueen or plastic sheeting on the framed basement walls? No you should not, as plastic will prevent moisture from moving through the wall and will lead to mold and damage.

Is it OK to paint basement concrete walls?

DO NOT PAINT YOUR WALLS, even with Drylok or waterproofing paint. Concrete does not support fungal (mold) growth. Also, do not attach insulation directly to the foundation walls. It behaves as a moisture trap and can also hide structural problems and cracks in the foundation.

Can you finish a basement for $10000?

Remodeling a basement costs $5,000-$10,000 on average, so you can easily finish your basement for $10,000 or less. Typically, this cost includes: Adding walls.

You might be interested:  Quick Answer: Tiling A Wall Where To Start?

Should you seal basement walls before finishing?

Step #1 in Basement Remodeling – RadonSeal Concrete Sealer



Water issues can cause serious damage and ruin your investment. Before finishing the basement, deep-seal your concrete against water seepage, water vapor, and soil gases like radon.

How much does it cost to frame and drywall a basement?

Framing: You should expect to spend about $1 per square foot to frame your basement. Drywall: It costs around $1.50 per square foot to hang drywall in your basement. Ceiling: Basic ceiling installation can cost as little as $1-2 per square foot. But, if the project is complex, it can cost around $6 per square foot.

What can I use instead of drywall in my basement?

Plastic paneling is very easy to install, making it an easy drywall alternative to recommend. You can simply screw most plastic paneling into place and you will be able to cover up walls directly.



  1. Wood Planks.
  2. Plastic Panels.
  3. Plywood.
  4. Veneer Plaster.
  5. Pegboard.
  6. Lath and Plaster.
  7. Wahoo Walls.
  8. Textured Wall Panels.

What is the going rate for framing a basement?

The average cost to frame a basement is $1 per square foot for the materials and $2.70 to $3.39 per square foot installed with drywall and ready for painting. When framing an existing basement, you are installing a wood framework in preparation for insulation packing, wiring, and plumbing.

Do basement walls need to breathe?

It behaves as a moisture trap and can also hide structural problems and cracks in the foundation. Bottom line: basement walls need to breathe too. Once the moisture gets in and stays, mold growth, and eventually rot, are inevitable. So keep wood, drywall, carpet, carpet padding, tack strips, etc.

Written by

Leave a Reply