Question: How To Frame A Basement Wall Around Pipes?

How far should studs be from basement wall?

Be sure to maintain the 16-inch on-center stud spacing, and check the wall frame to make sure it’s plumb before nailing it to the beam.

How do you cover water lines in a basement?

If you have several pipes together in one or more locations, you may be able to hide them with a box. If you are handy with a hammer and saw, frame a box around your pipes and then wrap it with paneling or drywall. Finish and trim as needed and stand back to admire your work.

How do you hide wires and pipes in a basement?

  1. Paint to Match Ceiling. If you are looking for an easy, budget-friendly way to hide low pipes in your basement, paint is your best option.
  2. Fabric. Like painting, fabric offers a quick, inexpensive way to conceal pipes in your basement ceiling.
  3. Faux Wood Beams.
  4. Suspended Ceiling.

Should you put plastic on basement walls?

Should I use visqueen or plastic sheeting on the framed basement walls? No you should not, as plastic will prevent moisture from moving through the wall and will lead to mold and damage.

You might be interested:  Quick Answer: How To Fix Crack In Concrete Wall?

Should you put a vapor barrier on basement walls?

Vapor barriers should be located on the exterior of basement assemblies allowing inward drying to the basement space where moisture can be removed by ventilation or dehumidification.

How do you hide pipes in a laundry room?

Use a stenciled pegboard to cover up an ugly wall.



In this situation, there were pipes on the wall so wallpaper or tiles weren’t an option. The pegboard also maximized storage because she was able to hang shelves easily.

How do you hide exposed pipes on the wall?

Paint your pipes the same color as the wall to hide them.



Use a paint brush to add some color to your pipes so that they don’t stand out so much against your wall. If you want to emphasize the industrial look of the exposed pipes, you can paint them a complementary color so they really stand out.

Can you paint pipes in basement?

Polished Pipes



If your basement ceiling is filled with exposed, rusted pipes, grab a can of paint that matches or complements the walls, and give each pipe a couple of coats. This project is a twofer: You‘ll clean up your unsightly pipes and make the space feel more cohesive.

How do you hide pipes under a floating vanity?

Tip. Some ways to camouflage or hide pipes under a wall-mount bathroom sink are to paint them or cover them with decorative tape, install a sink skirt or build a small vanity.

Is framing a basement hard?

Framing basement walls is the first phase of learning how to finish a basement. I do love the smell of lumber dust on a cool fall morning. Don’t worry, it’s not as hard as it looks, but it’s one of the steeper learning curves.

You might be interested:  Often asked: How To Hang Wire Baskets On Wall?

Can I frame my basement without a permit?

Permits for finishing your basement. If you’re finishing your basement yourself you can actually start without one. The very first inspection visit is the framing inspection so as long as you have the permit before then, you’re good to go.

Can I frame with 2×3?

Most wall framing is done with 2×4 or 2×6 lumber, but it may be possible to use 2×3’s to build a new, non-load bearing, interior wall. By code, 2×3’s may be used for this purpose if the wall is no taller than 10 feet and the studs are spaced every 16 inches. In addition, electrical boxes won’t fit in a 2×3 wall.

Written by

Leave a Reply