Question: How To Make A Cinder Block Retaining Wall?

Can I use cinder block for retaining wall?

A cinder block retaining wall is only as straight and solid as the base it’s built on. For a 4-ft. tall wall, excavate a trench deep enough to accommodate 4 to 6 in.

How much does it cost to build a cinder block retaining wall?

A cinder block wall costs between $10 to $15 per square foot for materials and is a great option if you’re looking to build curves into your design without extending your budget. It’s affordable, versatile and can be installed quickly and easily.

What is the cheapest retaining wall to build?

What is the cheapest retaining wall material?

  • Treated pine and is the least expensive material.
  • Hardwood is more expensive than treated pine.
  • Railway sleepers are another – slightly more expensive – option and are built to withstand ground and water contact.
  • Concrete sleepers are more expensive.
You might be interested:  Quick Answer: How To Waterproof A Basement Wall From The Outside?

What is the easiest retaining wall to build?

For the average do-it-yourselfer, building a retaining wall is easiest when using masonry blocks that will be stacked no taller than three feet, with no mortar binding the stones or concrete members. (For a curved wall, mark instead with a garden hose or spray paint.)

Should you fill cinder blocks with concrete?

Whenever you are working with cinder block, you can strengthen them significantly by filling them with concrete. This is something that is not difficult to do and will strengthen your cinder blocks quite a bit. You may also find that if you have cinder blocks that are cracked, concrete can help.

Do I need rebar for cinder block wall?

Steel reinforcing bar — rebar — is used in concrete construction to add strength. A concrete block wall will support heavy weights above, but it needs reinforcing against pressure that would cause it to bend, such as earth backfill in a basement.

Are poured concrete walls better than block?

Poured concrete wall foundations are arguably stronger than cinder blocks. Poured walls have a better lateral strength, which means they are able to resist more pressure from the water and the soil from the outside. Poured walls tend to be the preferred choice of new construction builders.

What blocks to use for retaining wall?

Concrete blocks can be used by laying them side by side, again with mesh ties holding the two sections together, or by laying them flat to give either a 225mm wide wall, or long ways to give a 450mm wide wall. There are also proprietary products for building strong walls and one of these is the hollow concrete block.

You might be interested:  Often asked: How To Clean Bathroom Wall Tiles?

How do you estimate a cinder block wall?

After you have found the square footage of both your wall and your block, determining the number of blocks you need is as simple as dividing the wall square footage by the block square footage. If you’re using a standard 16″ x 8″ x 8″ block, find the number of blocks needed by dividing the wall square footage by 0.89.

Can I build my own retaining wall?

Retaining walls can be made from wood, bricks, natural stones or concrete blocks. For DIYers, it’s best to use concrete retaining wall blocks, which can be interlocking and are heavy enough to stay in place without cement or other adhesive. Interlocking blocks fit together and add extra security to the wall.

Is it cheaper to build with cinder block or wood?

Concrete block homes are sturdy once inexpensive steel reinforcing rods and wet concrete are placed in the cores. However, homes built of wood are less costly to construct, not only because wood is lightweight and plentiful, but also because builders can build such homes quickly.

What can I do instead of a retaining wall?

Reinforced soil slopes are the most cost-effective retaining wall alternatives. Often times you are using the soil that you already have on hand and do not need to bring in any additional.



  • Reinforced Soil Slopes.
  • Natural Stone Walls.
  • Wooden Timbers.
  • Gabion Walls.
  • Soil Bioengineered Walls.

Does a 2 foot retaining wall need drainage?

Although there are exceptions, most retaining walls require gravel backfill, soil compaction, pipe or toe drains, and weep holes. Together, these four features will provide adequate drainage for most designs. Only a few types of walls will not require all of them.

You might be interested:  FAQ: How To Install A Proline Wall Mounted Range Hood?

How long do retaining walls last?

How long will my retaining wall last? For a permanent wall structure, the general lifespan is generally between 50 and 100 years. This does, however, depend on the conditions of the soil and groundwater at your site.

Written by

Leave a Reply