Question: How To Make A Simple Wall Shelf?

How do you build wall shelves on a wall?

  1. STEP 1: Measure the space. The first thing you need to do is measure the space you have to work with.
  2. STEP 2: Cut, sand, and finish wood. Next cut the 1″x2″ boards and 1″x10″ boards to the sizes you need.
  3. STEP 3: Install the bracing.
  4. STEP 4: Install the shelves between the walls.

Is it cheaper to build your own shelves?

DIY Pros and Cons



Building your own shelves can be beneficial for some, but may not be the right choice in every situation. Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time.

How can I make cheap shelves look expensive?

Add Molding to Make It Look More Expensive



Fine furniture is usually finished with as much trim and molding as the style allows. Thus, you can make a cheap bookcase look more expensive by adding molding—even if it starts as an everyday laminate piece.

How deep should wall shelves be?

As far as shelf size, a depth of 10 or 12 inches fits most functions without concern of drooping in the middle, while length should be determined based on where you want to install yours. If you want a long span but are concerned about weight, install adjacent, identical floating shelves, or opt for bracket supports.

You might be interested:  FAQ: How To Match Paint On A Wall?

What kind of wood is used for wall shelves?

If you are making shelves where the color and grain of the wood is an important part of the design, look for oak, maple, or cherry plywood—these options will still offer durability, but will help keep costs down compared to with non-manufactured hardwoods of the same species.

How do you attach a shelf to the wall?

Transfer to the Wall



Hold the level against the wall at the height you want the shelf. Remember that the top of the shelf will be above your marks. Adjust the level until the bubble is centered, and mark the keyhole locations on the wall. Then install anchors or drive the screws into the studs and hang the shelf.

Written by

Leave a Reply