Quick Answer: How To Build A Fence On A Retaining Wall?

Can I put a fence on a retaining wall?

Installing the fence or railing directly behind the block is a common application. Fences can be placed closer to the wall than 3 feet, but a design professional should be involved with the project to ensure that the top of the retaining wall can withstand the forces from the fence.

Do I need a fence on top of my retaining wall?

In NSW the fencing act says(in layman`s terms) it basically comes down to whoever`s land needs to be retained is the one who has to pay for the wall and the wall stays on your side of the boundry but is usually right up against it,the fence on top of the wall if needed is a 50/50 split.

How close can a retaining wall be to a fence?

The retaining wall must not be closer than 1.5 metres to any other buildings or walls. If you do not meet the criteria, you will need to submit a building application and have it approved by a certifier before progressing.

You might be interested:  Often asked: How Long To Walk Great Wall Of China?

How do you fill gap between fence and retaining wall?

Wall should have been built to the boundary with fence on top. Sell that strip of land to your neighbour. That’s all it’s good for. drop gabian style wire basket into the gap, fill with rocks, instant seating while keeping integrity of drainage.

What is the cheapest type of retaining wall?

What is the cheapest retaining wall material?

  • Treated pine and is the least expensive material.
  • Hardwood is more expensive than treated pine.
  • Railway sleepers are another – slightly more expensive – option and are built to withstand ground and water contact.
  • Concrete sleepers are more expensive.

At what height does a retaining wall need to be engineered?

Most municipalities require a building permit and a design from a Licensed Engineer if your wall is taller than 4 feet high (measured from the bottom of the first block to the top of the last block). Will your retaining wall be terraced?

Who should pay for retaining wall?

Retaining wall requirements by state

Speaking with a qualified engineer is recommended. In New South Wales, neighbours would normally share the cost of a retaining wall on a boundary, unless one was responsible for damage.

Who pays for retaining wall?

Regardless of which side of the boundary the wall is, the owner receiving the benefit of the wall is responsible for maintaining it. In example 4 below, owner B would be responsible for the wall even if it had been built with boundary position 2 (on the neighbour’s property).

Do I need permission to build a retaining wall?

Planning permission is required if the wall is to be over 1-metre high and next to a road or pathway; or over 2-metres high elsewhere. Independent, freestanding retaining walls may not require building regulation approval; however, any structures must be structurally sound and well maintained.

You might be interested:  Question: How To Build A Shelving Unit On A Wall?

How high can you build a retaining wall without council approval?

For example, in New South Wales, you can only build your retaining wall up to 600mm from ground level without council approval while on the Gold Coast of Queensland, you need building approval for retaining walls 1 metre or more in height.

Can I legally paint my side of Neighbours fence?

If you want to change anything about a fence that legally belongs to your neighbour, you should ask their permission first – even if you’re only painting or staining your side of the fence.

Who is responsible for retaining wall failure?

The property on which the retaining wall sits is responsible for maintaining the wall. If the wall is not on your property, you are not responsible for the upkeep, maintenance and repair of the retaining wall, even if it is for the benefit of your property.

What do you put between fence gaps?

Stones

  1. Fill the gap with all-purpose decorative stone or washed river rock. Choose stones sized between 1 and 3 inches in diameter.
  2. Multiply the length of the gap by the height and width of the gap to determine the cubic feet of the area.
  3. Dump the rocks or stones into the gap beneath the fence.

Written by

Leave a Reply