Quick Answer: How To Cut Through Cinder Block Wall?

How do you cut a cinder block wall?

The most efficient way is to use a circular saw to slice through the tough cinder block. If you’re less concerned with making a clean, accurate cut, you could also try splitting the block with a hammer and chisel.

How do you make a cinder block wall look good?

If you’re tired of looking at that plain cinder block wall on your property, you have plenty of options for giving it a facelift. For a quick and simple cover up, try concrete or stucco. To give the wall a a more unique character, consider stone wall veneer or climbing plants.

Can you drill through cinder block?

When drilling into a cinder block to place a concrete anchor, a hammer drill must be used with a drill bit that has a carbide tip. Drilling into the solid section does not create many problems when using a masonry bit. The hammer drill will drill the hole easily into the cinder block.

What to use to cut concrete blocks?

If your cut doesn’t need to be exact, use a cold chisel and hand sledge to cut the concrete. Score the length of the cut three or four times with the chisel. A circular saw with a masonry blade can also be used to either score or completely cut through the block.

You might be interested:  Quick Answer: How To Paint Vertical Stripes On Wall?

How do you cut a cinder block with an angle grinder?

How to Cut Concrete Blocks With an Angle Grinder

  1. Layout the cut on the concrete block with a tape measure and pencil.
  2. Put on safety goggles, a dust mask and leather work gloves.
  3. Turn on the angle grinder.
  4. Score the concrete block’s surface along with the pencil marks with the angle grinder’s blade.

How do you cover interior cinder blocks?

Ideas for Finishing an Interior Concrete Block Wall

  1. Pargeting. Pargeting is the traditional way of covering up concrete blocks.
  2. Painting. If you can’t be bothered with parging, you can still improve the look of your wall by painting it.
  3. Wood Paneling. You can hide your concrete blocks altogether by facing the wall with wood paneling.

Can you put drywall over cinder block?

Drywall is one solution. Attaching drywall directly to block is looking for trouble; it will eventually mildew, mold and ruin. The professional way to install drywall in these situations is to create a wood frame, of either 2-by-4 studs or thinner furring strips, and then hang the drywall.

Can you plaster over cinder block?

In addition if plastering over an interior smooth surface such a concrete or cinder block wall you can also use a plaster bonder to improve adhesion of the base coat. Once the base coat cures (not dries) you can apply a finish coat of plaster.

Will drilling into concrete crack it?

Drilling, nailing and screwing can all cause concrete to crack if they’re not done properly. Although it seems like a very tough material, concrete is in fact extremely brittle and prone to cracking.

You might be interested:  Question: How To Hang Vinyl Records On Wall?

Can you screw straight into breeze block?

Just screw straight into them with the yellow single thread screws. You dont need a plug, the screw thread will just bite into the block. I do this all the time when fixing skirting boards to breeze block walls in garage conversions. You can try plugs, but they just spin the plug before tightening up for me.

Written by

Leave a Reply