- 1 What can I use if I don’t have a stud finder?
- 2 How can you tell where a stud is in the wall?
- 3 What if there are no studs in my wall?
- 4 Can I use my iPhone as a stud finder?
- 5 Why do stud finders never work?
- 6 How far apart are wall studs?
- 7 Are studs always 16 apart?
- 8 How far apart are studs in older houses?
- 9 Can you mount a TV without studs?
- 10 Can you mount a 60 inch TV on drywall?
- 11 How much weight can a drywall anchor hold?
- 12 Can you hang a 65 inch TV on the wall?
- 13 Is there a stud finder that actually works?
- 14 Is there a stud finder app that actually works?
- 15 Can you download a stud finder?
What can I use if I don’t have a stud finder?
Look at the Trim
The baseboards in your home are attached to the studs. Check your baseboards to see if you can spot where it might have been nailed. These holes (commonly known as dimples) are usually painted over and filled with caulk. Despite this, you may be able to see one to locate a stud.
How can you tell where a stud is in the wall?
A good starting place is 16 inches from a corner. For better precision, use a tape measure and mark 12 inches, 16 inches, and 24 inches from the corner. Tap the wall at each distance. You’ll hear a solid sound when you tap the part of the wall that is supported by a stud.
What if there are no studs in my wall?
An anchor is one of the simplest ways to hang a TV on the wall without a stud. They help to prevent the screws from falling out of the holes on the wall, or from destroying your wall. It offers a secure mounting for flat-screen TVs. Just drill a hole accordingly, insert the sleeve, and slide in the anchor piece.
Can I use my iPhone as a stud finder?
The iPhone beeps when its magnetometer, in the upper right of the phone, is near metal. Stud Find is an iPhone application that uses the device’s built-in magnetometer to find metal studs, screws, nails and anything metallic in a wall.
Why do stud finders never work?
Most magnet type stud finders don’t work effectively since they are dependent on locating the fasteners (screws) used to secure the drywall and they can be very difficult to locate.
How far apart are wall studs?
The general spacing for wall studs is 16 inches on center, but they can be 24 inches.
Are studs always 16 apart?
Why You Should Find Studs
They’re always spaced either 16 or 24 inches on-center (measured from center to center) along the wall and run between the floor and ceiling. Drywall or lath (for plaster walls) attaches to the edge of the studs.
How far apart are studs in older houses?
Before starting, there are a few things you need to know about walls: Typical stud spacing is 16 inches on center and even on older houses is rarely more than 24 inches on center; the majority of electrical boxes for switches and outlets are attached to a stud on one side; studs are on either side of a window; most
Can you mount a TV without studs?
Can you mount a TV without studs? You can mount a TV without studs using anchors, toggle anchors, mounting plates, ceiling mounts, and other mounting options. Of course, you have to keep your TV’s size and weight in mind and choose the right option.
Can you mount a 60 inch TV on drywall?
Do not mount your expensive TV to the drywall regardless of what kind of fastener you use. The correct answer is to attach it to the structural part of the wall – the studs. That can be challenging – depending on the location of the studs and where you want the TV to be on the wall.
How much weight can a drywall anchor hold?
Toggles, anchors or molly bolts are surprisingly strong. A 1/8 toggle can hold 30 pounds on 1/2-inch drywall and a 3/8-inch toggle can handle a hefty 50 pounds or more safely. When applying any kind of drywall anchor, you should understand how they work and which screw anchor may work best to put into a hollow wall.
Can you hang a 65 inch TV on the wall?
While it may seem surprising that an extendable articulating arm is capable of supporting so much weight, you can absolutely get a full motion TV wall mount for a 65 inch television.
Is there a stud finder that actually works?
If you’re hanging heavy pictures, mirrors, or shelves, you need to know where your wall studs are—and the best tool we found for the job is the C.H. Hanson 03040 Magnetic Stud Finder.
Is there a stud finder app that actually works?
Stud Detector is one of the best stud finder app for android users which allows you to easily ind metal framing studs. It is simple, easy to use and free android app which works on basis of magnetic field and compass apps. You can also use it as to know magnetic field from your android smartphone.
Can you download a stud finder?
Stud finder app for iOS and Android brings the simplicity and effectiveness of a real stud detector tool to your iPhone or Android device. The app uses your device’s compass (magnetometer sensor) to pinpoint metal studs, nails, and screws embedded in all wood wall studs.