Quick Answer: How To Hang Christmas Lights On Wall?

How do you stick Christmas lights to the wall?

  1. Attach your decorating clips or gutter hooks to the surface you are decorating at regular intervals. Use a clip or hook every 30 to 50 centimetres (cm).
  2. Plug the lights in, but do not switch these on yet.
  3. Work slowly around the area you’re decorating until you reach the end of your string of lights.

How can I hang Christmas lights without damaging the wall?

Stick a small adhesive decorating clip to the walls in each place you want to attach a strand of lights. To secure a vertical stretch of lights going straight up or down the wall, face the clips in alternating directions to make the arrangement more secure.

How do you hang lights on a wall without nails?

How to hang fairy lights without nails

  1. Drawing Pins. Probably the default option for many people, drawing pins (we find that brass drawing pins are often best) can be pushed between the twisted wires that often make up fairy lights, as indicated in the image below.
  2. Blu-Tack.
  3. Wrapping around household objects.
  4. Wire Suckers.
  5. Damage-free Adhesive Hooks.
You might be interested:  FAQ: How To Cover Up A Wall Heater?

Do Christmas lights get hot enough to start a fire?

Christmas lights can cause fires when a socket gets overloaded or if electrical wires are faulty. The lights themselves produce some heat, but they can never get hot enough to burn anything, no matter how long they are left on.

How do you hang lights without drilling?

Use Adhesive-Backed Hooks



Just like with gutter hooks, adhesive-backed hooks can help you hang outdoor lights without using nails or drilling holes. However, you don’t hang these off the lip of a gutter or other surface. Instead, you either peel the back or apply adhesive to the hook and pin it onto a flat surface.

Is it safe to have Christmas lights in your bedroom?

Christmas tree lights should not be left on for prolonged periods of time or overnight. Even LED lights can overheat, and with a combination of a dry Christmas tree, could cause a fire. Make it a habit to turn off your Christmas lights every time you leave the house or go to bed at night.

How do you hang Christmas lights on stucco without drilling?

You can do this indoors by plugging the lights into an electric outlet. Replace bulbs as needed, then unplug the lights and take them outside. Arrange the lights along the line of clips, placing the cord in each clip as you go. Plug the light string into an outdoor outlet, using an extension cord if needed.

How do you stick lights to a wall?

Use tape or tacks to secure the lights to the wall.



If you’re doing the perimeter style, secure a part of the light strand with tape or a tack and move 1–2 feet (0.30–0.61 m) across the wall with the strand. Then, secure the strand again at that point.

You might be interested:  FAQ: How Much Does It Cost To Learn Taekwondo?

Do Command Hooks damage walls?

One click tells you Picture Hanging Strips are locked in and holding tight. Best of all, when you are ready to take down or move your pictures, they come off cleanly—no nail holes, cracked plaster or sticky residue. Learn the proper way to remove Command™ Picture Hanging Strips so they won’t damage your wall.

How do you hang lights on a concrete wall?

So to attach rope lights to concrete while you could use the Scotch Outdoor Mounting Tape, a better, more long-term solution will be to drill holes in the concrete and use screw-on clamps. First, hold the rope against the concrete where you want it to go.

How do you hang lights around a room?

If you’re hanging your Christmas lights, Command hooks work wonders. (There really doesn’t seem to be an occasion where Command hooks or strips don’t work in a dorm.) If you are allowed to put holes in your walls, you can use tacks to hang them easily — just be sure not to puncture any of the wires with the tacks.

How do I decorate my bedroom with string lights?

18 Ways To Utilize String Lights In Your Bedroom

  1. Headboard Garland. Pair your string lights with some fabric garland.
  2. Bed Canopy. Apartment Therapy shows off how to pair those string lights with your bed canopy.
  3. Heart-Shaped. Of course you can create some wall art out of them as well.
  4. Wrap-Around.
  5. Photo Hangs.
  6. Tapestry.
  7. Bedside Table.
  8. Circling the Mirror.

Written by

Leave a Reply