Quick Answer: How To Install 12×24 Wall Tile?

Which direction should 12×24 tile be laid?

Its direction is similar to a brick wall, where the longer side is across the surface. This creates a more pleasant layout and makes the room look wider. For a much smaller space, such as the bathroom, it’s best to lay down the tiles the long way, where the longer side is set vertically.

Are 12×24 tiles hard to install?

Installing 12×24 tile can be a little tricky compared to smaller tiles, but with a little planning, and a few tricks up your sleeve, this can be a great DIY project even if you don’t have a ton of tiling experience.

Can you use 12×24 tile on shower wall?

To install a 12 x 24 porcelain tile on a shower wall, you must first determine the layout of the tile. After measuring the area, you‘ll set the tile with a trowel based on your tile size and shape. After letting it sit for 24 hours, you‘ll remove the spacers and check the tile for any blemishes.

You might be interested:  Readers ask: How To Knock Out A Load Bearing Wall?

Should you stagger 12×24 tile?

It’s because the tile have a slight bow in them, and if you stagger them at 12″ you‘ll be setting the highest part of the tile, the middle, next to the lowest part of the adjacent tile, the ends. You‘ll end up with significant lippage at best, and with a basket weave appearance at worst.

Should shower tiles be horizontal or vertical?

Lay bathroom wall tiles horizontally when you want your space to look wider horizontally. If you have a limited floor space but a tall bathroom, you might like to choose this option. It will visually open up the space, giving you the illusion that the space is wider and longer than it actually is.

How thick is Thinset for 12×24 tile?

With the above trowel, figure about 3/16″ for thinset. 3. That depends on how consistent the tiles are. You might be better to go with 3/16″ to allow for minor differences in the size of the tile.

Do you need to back butter 12×24 tile?

The increased surface area of tiles larger than about 8 x 8 in. makes it critical that you butter the back to ensure a strong bond. It takes only a few extra seconds per tile to spread a thin layer of thin-set on the back of the tile with the flat side of the trowel.

How many square feet is a 12×24 tile?

12″X 24″= 2 square feet.

Can tiles be too heavy for a wall?

Tiling direct onto plasterboard, without plaster skim is more stable. As a result, these walls can support a maximum weight of 32kg/m². This is suitable for ceramic tiles with a thickness of 12mm, or stone tiles with a thickness of 10mm.

You might be interested:  Readers ask: What To Do With A Mirror Wall?

Are large tiles harder to install?

Larger tiles are much easier to install than small ones. Larger tiles are commonly used for bathroom walls, but are great for kitchens and other rooms too. The smaller 1x1s are going to take longer to set, so choose a small pattern.

What is considered a large format tile?

Large format tile is considered to be square or rectangular tiles larger than 12×12, including popular wood look porcelain planks in sizes like 6×24 and 6×36.

What is a good tile for shower walls?

The Best Tile for Shower Walls

  • Ceramic / Porcelain.
  • Glass.
  • Marble/Stone.
  • Smaller Glass Tiles Work Better Than Larger Ones in a Shower.
  • Use a Second Tile Choice for Contrast.
  • Consider How Much Cleaning You’re Willing to Do.
  • Add a High-End Look to Your Shower.

Should tile be at the top or bottom of a shower wall?

Plan the Layout



The goal is to maximize the size of tiles at the bottom and top, avoiding narrow pieces. I avoid using a full piece at the top because the ceiling is usually not perfectly level. By cutting the top course of tile on all three walls, I can keep the joint width consistent all the way around.

Can you put 12×24 tile on ceiling?

Although your guy may not like it, it’s very possible to use large tiles on a ceiling. I’ve done it a lot. And the ceiling will certainly support large tiles just as well as smaller ones.

Written by

Leave a Reply