Quick Answer: How To Make A Wall Shelf?

Is it cheaper to build your own shelves?

DIY Pros and Cons



Building your own shelves can be beneficial for some, but may not be the right choice in every situation. Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time.

How do you make a shelf bracket for a wall?

Instructions

  1. Cut a 2″ x 2″ board to 7.5″.
  2. Cut a second piece to 6″.
  3. Use a miter saw to cut the 1″x2″ board to 5.5″ long, with a 45-degree angle at each side to form a trapezoid.
  4. Sand any rough edges.
  5. Use wood glue and finishing nails to connect the three pieces to form the shelf bracket.

How can I make cheap shelves look expensive?

Add Molding to Make It Look More Expensive



Fine furniture is usually finished with as much trim and molding as the style allows. Thus, you can make a cheap bookcase look more expensive by adding molding—even if it starts as an everyday laminate piece.

What is the cheapest wood for shelves?

What is the cheapest wood for shelves?

  • Pine. Pine is one of the most affordable and popular softwoods in the market.
  • Plywood. Plywood is another good option for people who are interested in making their own shelves.
  • Cherry. Although cherry is a hardwood, it is lightweight and easy to use.
  • Koa.
  • Red Oak.
  • Paduak.
  • Mahogany.
You might be interested:  Often asked: What Time Does Taekwondo Start?

How long do shelf brackets need to be?

The length of the protruding leg must be at least two-thirds of the depth of the shelf. For example, if the desired shelf is 12 inches deep, the supporting legs of the bracket must be at least 8 inches. Usually, both legs of the brackets are the same length; but this is not a hard rule.

Written by

Leave a Reply