Quick Answer: How To Paint Wall Trim With Carpet?

How do I protect my carpet when painting baseboards?

To keep carpet safe, lay down masking or packing tape and slide it under your baseboard with a putty knife to prevent drips. You can use a paint guard or metal sheet if you want an added layer of protection. Use painter’s tape to protect the wall above your baseboard if it has already been painted.

Do you put trim on before or after carpet?

You want to install your trim before the carpet. This will make it much easier to paint or stain the baseboards without worrying about dripping on or ruining the carpet. The good news is that people actually install carpeting and trim in either order, so there isn’t any big reason to worry about it.

Should I paint walls or trim first?

Pros usually follow a certain order when painting a room. They paint the trim first, then the ceiling, then the walls. That’s because it’s easier (and faster) to tape off the trim than to tape off the walls. And you certainly don’t want to tape them both off!

You might be interested:  How Much To Build A Wall In House?

How do you paint baseboards without brush marks?


  1. Plan to apply multiple coats.
  2. Sand in between.
  3. Consider a flat or matte, or semi-gloss sheen to help conceal and brush marks.
  4. Do not apply water-based paint on top of oil-based paint.

Do you paint first or carpet first?

Installing carpet first allows you to survey the baseboard trim and evaluate if you may need to touch up or repaint it while you paint the room. Rather than making this discovery after you‘ve put your paint cans away, it may be worthwhile to see the carpet in action first.

Do baseboards have to be removed to install carpet?

You should know that, in many cases, moldings and baseboards need to be removed for carpet installation. Painted baseboards, woodwork and paint may need retouching after the installation is complete.

How do you prepare baseboards for painting?

Trim, baseboards, and moldings add architectural interest to any room, and a fresh coat of paint makes these features stand out even more.

  1. Step 1: Scuff-Sand Surface.
  2. Step 2: Remove Particles.
  3. Step 1: Push Nailheads.
  4. Step 2: Fill Nail Holes.
  5. Step 3: Add Putty.
  6. Step 1: Wash Surface.

Do baseboards sit on top of hardwood?

Wood flooring expands and contracts due to variances in temperature and humidity. Due to the expansion, Easiklip and other solid hardwood flooring manufacturers recommend a 15 mm (1/2 in.) gap between the floor and the wall. The molding sits on top of the floor and flush baseboard to the wall to cover the gap.

You might be interested:  FAQ: How To Get Rid Of Bees Nest In Wall?

How do you seal between baseboards and carpet?

To seal, simply caulk three lines – 1) along the gap between the baseboard and the wall; 2) the gap between the quarter-round and the baseboard, and 3) the gap between the quarter-round and the floor. Use paper towels to tidy up smears or droplets.

What size baseboards are in style?

A general rule of thumb for your baseboards is the 7 percent rule — they should equal 7 percent of the overall height of your room. So, if you have 8-foot ceilings, your baseboards will look best at around 7 inches high.

Can you cut in paint one day and roll the next day?

You can cut-in around the trim either before or after rolling. Because the drying time of flat and eggshell latex paint is so short, you can cut-in an entire room before filling in the walls. If the ceiling is being painted a different color, paint it first and then the walls.

What is the best order to paint a room?

The Best Order When Painting a Room

  1. The Ceiling. The ceiling should always be painted first.
  2. The Walls. Once the ceiling has dried, the walls should be cut and rolled with at least two coats (stubborn areas should likewise be primed before the top coats are applied).
  3. The Skirting Boards.
  4. The Window and Door Frames.
  5. The Doors.

Do I need to cut in twice when painting?

Don’t cut in twice and then roll. Cut in one coat and then roll on one coat, so the coats dry together and create a smoother finish. The process of applying a second coat of colored paint to your interior walls is the same as you used for the first coat.

Written by

Leave a Reply