Quick Answer: How To Paint Zebra Stripes On Wall?

How do you paint multiple stripes on a wall?

  1. Paint the entire wall white. Let dry.
  2. Tape off random vertical stripes in varying widths. Keep in mind that you’ll want to leave some stripes white. Paint these stripes light coral.
  3. Re-tape another set of stripes for the dark coral. Paint, remove the tape, and let dry, then repeat for the blue stripes. Next Up.

How do you paint thin stripes?

Steps:

  1. Paint the piece in the desired base coat color and let dry thoroughly.
  2. Measure and mark the desired width of the stripes with light pencil lines.
  3. Paint the exposed surface as desired and let dry.

How do you draw a zebra step by step?

DIRECTIONS

  1. Draw the torso of the body.
  2. Add the head above.
  3. Draw an ear, mane, eye and mouth.
  4. Draw two side legs.
  5. Add two far legs.
  6. Draw a hoof on each leg. Add a tail.
  7. Start drawing the triangle stripes.
  8. Finish the triangle stripes. Add a background.

How do you get crisp lines when painting?

More videos on YouTube

  1. Here’s the trick. Paint over the edge of the tape with the color already on the wall (or whatever you’re painting).
  2. After that coat dries, apply your new color (in this case, the yellow) on top. Porch.com.
  3. Peel away the tape, and voilà!
You might be interested:  Quick Answer: How To Hang Prints On Wall?

Should I paint horizontal or vertical stripes?

Choose Vertical or Horizontal Stripes



They are classic, elegant and never go out of style. Horizontal stripes make a room appear more spacious; vertical stripes make the ceiling appear higher. Tone-on-tone vertical striping was the technique we used in our demonstration.

How do you measure wall stripes?

Measuring for a Horizontal Wall



For one wall, simply measure the height of the wall in inches and divide the measurement by your stripe width. This will determine the number of stripes and also allow you to space the stripes symmetrically within the space provided.

How do you paint stripes with spray paint?

How to Spray Paint Gold Stripes

  1. First, measure and tape the outside of the stripes using Frog Tape.
  2. Use a similar color to roll on as a base coat.
  3. Use craft paper or painter’s paper to cover the wall surrounding the stripes and the ceiling.
  4. Spray paint over the painted stripe.

How do you draw a diagonal line on a wall?

First put a tack in the top corner of the wall and then another in the opposite bottom corner. Now you need to attach a piece of string to the two tacks to make a diagonal line. Now carefully stick FrogTape® Multi-Surface along the piece of string, from one corner to the other.

How do you paint stripes without tape?

For a charming, hand-painted look, simply paint the stripes right on the walls using an angled brush – start by tracing the edges of the guide lines, then fill in. It works best to work from the top down, and paint in about 12-inch sections to maintain a wet edge.

Written by

Leave a Reply