Readers ask: How To Hang A Dartboard Without Fixing It To A Wall?

Can I hang a dartboard on drywall?

To hang a dartboard on drywall, it’s best to mount the board to a wall stud. The stud provides ample support for the dartboard’s weight. A board can weigh 10 pounds or more, enough to rip the mounting screws out of drywall if the board is hung from drywall without wall anchors.

What do you put behind a dart board to protect walls?

Any wooden planks or salvaged wood can do the job here. The planks will protect your walls from stray darts. Wood is one of the recommended materials you can use as it will not damage the tips of your darts if they happen to land on it.

What do I need to hang a dartboard?

Your dart board should have a bracket on the back of it to mount on the wall. Use a stud finder to locate a stable place to hang your dartboard. Use wood screws instead of nails because they are made to grip into the wood and provide a better hole.

What is the best way to hang a dartboard?

The dartboard can be mounted inside a cabinet or directly to a wall. Screw to a wall stud or use anchors. The center of the bullseye should be 68 inches (173 cm) above the floor. Note that wall thicknesses will vary.

You might be interested:  How To Install Wall Mounted Faucet?

How high is a dartboard supposed to be mounted?

Standard height from the floor to the bullseye on the dartboard is 5 feet 8 inches, while the oche (distance between the front of the board and the toeline) should measure 7 feet 9.25inches.

Where should a dartboard be placed in a house?

In most cases, the best place to put a dartboard is in an area of the home that features the type of clearance that’s needed to throw darts, safely. The board should never be placed in a high traffic area, or in a room that has very little space to work with.

What is the best backing for a dart board?

The Best Dart Boards Backing

  • Viper Defender III Extended Length Dartboard Surround Wall Protector.
  • Cork Dart Board Backer.
  • Viper Defender Backboard & Sisal/Bristle Steel Tip Dartboard Bundle.
  • 36″ Professional Dartboard Backboard, Octagonal.
  • Viper Championship Wood Framed Dartboard Backboard Set, Mahogany Finish.

How do I keep my dart board from drying out?

Find a dishtowel or cotton cloth large enough to cover the board. Soak the cloth thouroughly in clean water,then wring it out thouroughly,so that it is merely damp. Place this damp (NOT wet) clothe over the board and leave it there overnight.

How heavy is a dartboard?

Technical Details

Product Dimensions 45.09 x 45.09 x 3.81 cm; 4.54 Kilograms
Display maximum weight recommendation 12 Pounds
Batteries required No
Item weight 10 Pounds

Can you hang a dartboard on a door?

The standard way to hang a dartboard is by putting it on a wall or a door. The other piece that should have come with your dartboard is the mounting bracket. The mounting bracket is placed on the wall with the use of two screws.

You might be interested:  Often asked: How To Repair Cement Block Wall?

How do you throw a dart?

How to throw

  1. Take back. The movement where you draw back the dart. Try to move your arm from your elbow so your arm makes a folding fan shaped movement.
  2. Release. The movement where you release the dart.
  3. Follow through. The movement where you extend your arm straight after release.

Written by

Leave a Reply