Readers ask: How To Install Cedar Shakes On A Wall?

How do you attach cedar shakes?

Start at the bottom of the wall at one end. Align the thick, lower edge of a cedar shake at the lower edge of the siding or shear wall. Align one of the vertical edges at the edge of the trim or corner of the wall. Attach the shake with a pair of 5d galvanized box nails and a shingle hatchet or hammer.

What goes under cedar shingles?

Synthetic underlayment: With modern improvements and manufacturing techniques, synthetic underlayments are now considered the best material installed under cedar shingles. Synthetic underlayments are made from polyester, fiberglass and polypropylene.

How do you prepare cedar shakes for painting?

Scrape any peeling paint chips off the shakes with a scraper. Remove as much of the old paint as possible, as the more prep work you do the better your home will look. Allow the house to dry completely for one to two weeks. Buy primer and paint to finish the job.

You might be interested:  How To Stick Pictures To Wall?

How much do you overlap cedar shingles?

Leave a gap of approximately 1/8” to 1/4” (0.3 to 0.6 cm) between neighboring shingles to allow for expansion due to moisture. Joints of successive courses must always be offset by at least 1 1/2” (3.8 cm) to prevent water build-up. Treat shingle imperfections the same way.

What nails do you use for cedar shakes?

The type of nails you choose to use when installing cedar shake siding should be considered also. The right nails play an important role in ensuring that your cedar wood siding endures for a long time. Ideal nails to use on cedar wood are made from aluminum, double-dipped galvanized, or stainless steel.

Can you put cedar shakes over siding?

from Cedar Shake and Shingle Bureau Exterior and Interior Wall Manual. Shakes and shingles may be used to cover existing wood beveled siding, masonry, or stucco. The shakes or shingles can be applied directly over the existing siding; however, rain screen application is necessary over brick, stucco, and foam sheathing.

Can you leave Cedar untreated?

Cedar has natural antibacterial and anti-fungal properties, allowing you to leave the wood untreated without worry of excess warping, rotting and cracking. It does weather, though, changing color throughout time, offering a much more rugged look than stained cedar siding offers.

What is the difference between white cedar shingles and red cedar shingles?

Left unpainted or unfinished, white shingles come to take on a pretty silver-gray color. Red shingles, on the other hand, appear rich and classic in their natural state. However, red cedar shingles cannot be painted, while white shingles can be painted any desired color as they naturally absorb paint well.

You might be interested:  FAQ: Taekwondo How To?

Do cedar shingles need to be treated?

Do cedar shingles need to be treated? No, the natural preservatives of cedar protect our shingles from ravages of fungi, humidity, and insects. However, they can be treated with preservatives or stains to achieve a different visual effect.

How often should you paint cedar shakes?

High-quality paint or stain, properly applied, should last five to seven years, and as many as 10, depending on weather conditions and if you maintain the siding. However, you may need to reapply a clear-coat stain every two years.

Do you need to prime cedar before painting?

Prime the Cedar Before You Paint It



It is strongly recommended that you go with the two-coat system for protecting your cedar siding. A primer with a paint top coat will have a significantly longer service life than will a single coat of paint or even a solid stain.

Is it better to paint or stain cedar shingles?

First, stain preserves the texture, grain and appearance of the wood better than paint. Second, with stain there is no peeling problem since it soaks into the wood. Finally, in most cases stain is actually easier to apply – at least on shingles.

Can you use a nail gun on cedar shingles?

Use either rust-resistant staples or shingle nails (1-1/4” to 1-1/2” long), galvanized, in stainless steel or aluminum”. It simply means that the best nail gun for cedar shingles will either be a stapler nail gun or any nailer that can shoots the recommended nails or staples!

How much does cedar shake reveal?

The maximum recommended exposure for cedar shingle siding is 1/2 inch less than one-half its length. For example, a 16 inch cedar shingle has an exposure of 7 1/2 inches; an 18 inch shingle has an exposure of 8 1/2 inches, etc. As with siding, shingle joints are the areas of least resistance to weather.

Written by

Leave a Reply