- 1 What goes between concrete slab and wall?
- 2 Do you need gravel under concrete sidewalk?
- 3 Do you need wire mesh in concrete sidewalk?
- 4 Do I need rebar in my concrete?
- 5 How do you calculate concrete?
- 6 How do I keep my concrete slab from moving?
- 7 How do I fill the gap between my house and concrete patio?
- 8 Can you pour concrete next to existing slab?
- 9 Can I pour concrete directly on dirt?
- 10 Why do you put gravel under concrete?
- 11 What is the best fill under concrete?
- 12 Is wire mesh better than rebar?
- 13 What is the best base for a concrete sidewalk?
- 14 Can I use chicken wire to reinforce concrete?
What goes between concrete slab and wall?
Caulking is the process of filling in cracked concretes or the gap between slab and wall. Now, this is an efficient way of sealing the gap. A large gap can result in water getting into the cracks and making it even bigger. So you must caulk the gap to cover it up.
Do you need gravel under concrete sidewalk?
Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.
Do you need wire mesh in concrete sidewalk?
Reinforcing concrete sidewalks with wire mesh helps to bridge over small imperfections in the subgrade. This lessens the likelihood that sinkholes will develop. Concrete sidewalks can be replaced in sections that mesh together nicely, although the color does not always match (few materials do).
Do I need rebar in my concrete?
Rebar is not necessary for every concrete project. The general rule of thumb is that if you are pouring concrete that is more than 5 inches in depth, you are probably going to want to add in some rebar to help reinforce the entire structure.
How do you calculate concrete?
How to calculate concrete:
- Determine how thick you want the concrete.
- Measure the length and width that you’d like to cover.
- Multiply the length by the width to determine square footage.
- Convert the thickness from inches to feet.
- Multiply the thickness in feet by the square footage to determine cubic feet.
How do I keep my concrete slab from moving?
Seal all open cracks and joints with a polyurethane or silicone caulk. Large gaps can be filled with a backer rod first and then caulked on top. Make sure downspouts are discharging at least five feet away from any concrete slab – the farther the better.
How do I fill the gap between my house and concrete patio?
Fill the Gap Between a Concrete Patio and House
- Asphalt saturated fiberboard, designed for expansion joints.
- Closed cell backer rod, a spline roller, and a pair of scissors.
- Concrete crack sealant and caulk gun for application.
- Not perfect, but it will do.
- All dry and with some windswept debris for character!
Can you pour concrete next to existing slab?
On the contrary, if your existing concrete is stable and elevating a few inches of its height won’t hinder anything in the way, then you can certainly get new concrete poured over the old one. But make sure to leave this to professionals since you don’t directly pour the layer of concrete.
Can I pour concrete directly on dirt?
Long story short, yes you can pour concrete over dirt.
Why do you put gravel under concrete?
Because concrete is a very porous material, it will absorb any moisture that it contacts. This can cause pooling. Without crushed stone, pooling water will settle under it and erode your slab. Adding a layer of crushed stone will add proper drainage, as well as create a barrier between your slab and the ground.
What is the best fill under concrete?
The top 6 to 12 inches of the backfill under the slab should be filled and compacted with well-graded gravel or crushed material. “Walls are typically backfilled with the removed earth or with a granular, open-graded material,” says Tull.
Is wire mesh better than rebar?
Considering the support constraint, rebar is undoubtedly stronger than wire mesh. Several constructors consider rebar for domestic jobs. For thicker driveways and locations that involve greater traffic, rebar is always a good option to consider.
What is the best base for a concrete sidewalk?
A firm, well-drained base is the key to crack-free concrete. The best plan for a solid base usually includes compacted soil followed by several inches of a base material such as gravel. But the best base depends on climate and soil conditions.
Can I use chicken wire to reinforce concrete?
Materials such as chicken wire, stucco mesh, wire screening, expanded metal, fence wire or fiberglass cloth should never be used as primary reinforcement because their properties are too variable or they are not sufficiently strong. You cannot rely on these materials.