Readers ask: How To Use Gas Fireplace With Wall Switch?

How does a gas fireplace with a switch work?

HOW DOES YOUR GAS FIREPLACE START? When you flip a wall switch, click on your remote control or the thermostat calls for heat, the gas valve on your fireplace will open. Gas valves generate their own electricity and operate on millivolts, a very small amount of electricity.

How do you turn on a gas fireplace with a switch?

It’s easy to know how to turn on a gas fireplace with an electronic ignition wall switch. Many gas fireplaces come equipped with a wall switch control panel for activating the unit and adjusting the level of the flame. Simply push the “On” button and the pilot should ignite.

How do you turn on gas fireplace with wall switch and key?

How to Use a Gas Fireplace With a Key

  1. Look around the base of the fireplace and locate a small metal hole; this is the keyhole.
  2. Grasp the handle of the key, which looks like a long metal pole.
  3. Turn the key counterclockwise approximately 1/2 turn to release the flow of gas into the fireplace logs.
You might be interested:  Quick Answer: How To Remove A Pedestal Sink From The Wall?

Why are there 2 switches for my gas fireplace?

Pilot flame is heating a safety element which actually allows the gas to flow to the burner. No pilot flame no burner gas. The second switch may or may not have anything to do with the fireplace. May be for powering a wall recepticule.

Can you leave a gas fireplace on all night?

No, you should not leave your gas fireplace on overnight as you risk carbon monoxide poisoning. Although it’s never recommended, if your gas fireplace has been properly maintained and designed to run continuously, it may be safe to leave it on.

Should the pilot light always be on in a gas fireplace?

Leaving the gas on keeps this compound moving out of the tubes. Keeping the pilot light on will also keep moisture out of the unit and in turn, help prevent corrosion. As you can see, it’s probably best in most cases to extinguish the pilot light in your gas fireplace during the months when you don’t need heat.

Why am I not getting gas to my fireplace?

Check your breaker box and reset any tripped breakers you come across. Gas Valves: Make sure that your gas valve is open and in the on position to ensure the flow of gas to your fireplace. This should be located in the firebox. If you have an older model, a key in the wall or floor should be nearby.

How do you turn on a gas fireplace without the key?

When learning how to turn on a gas fireplace without a key, confirm that the unit has a control panel with an igniter switch. Remove any fireplace decoration that’s in the way. Control panels can usually be found at or around the base of the fireplace, concealed by a decorative screen that should be moved.

You might be interested:  Readers ask: Where To Buy Wall Decals In Stores?

What do you do when your gas fireplace won’t light?

If your gas fireplace has an electronic ignition check or replace the fuse. While if it is on a breaker, turn the breaker all the way off and then back on again. Sometimes this is an easy way to fix a gas fireplace that won’t turn on.

Will gas fireplace work if power is out?

A fireplace or hearth stove can save the day—and night



If you have a gas fireplace or stove with a standing pilot, it will light during a power outage since it doesn’t require electricity to activate the pilot flame.

Can I run my gas fireplace without the fan?

You can operate an enclosed, vented gas fireplace without turning on the fan for as long as you need to. This includes both direct vent gas fireplaces and fireplace inserts. Vented gas fireplaces are designed to run with or without the fan so they can be used as a heat source even during a power outage.

What is the RS switch on gas fireplace?

The “RS” position (press the bottom part of the switch) permits the remote control switch to turn the fire on and off. The neutral position (halfway between “ON” and “RS”) turns the fire off.

What is a blower for gas fireplace?

A fireplace fan blower uses a space behind the fireplace to heat up air before it’s blown out into the room. This conductive heat transfer uses new air pulled in through vents, not air from your fire.

Written by

Leave a Reply