Youtube How To Build A Retaining Wall?

Can I build a retaining wall myself?

While retaining walls taller than four feet should be engineered by professionals, you may be able to DIY a solution for a tall slope by creating two or more shorter “tiered” retaining walls as opposed to a single tall wall.

What is the easiest retaining wall to build?

For the average do-it-yourselfer, building a retaining wall is easiest when using masonry blocks that will be stacked no taller than three feet, with no mortar binding the stones or concrete members. (For a curved wall, mark instead with a garden hose or spray paint.)

What is the cheapest material to build a retaining wall?

What is the cheapest retaining wall material?

  • Treated pine and is the least expensive material.
  • Hardwood is more expensive than treated pine.
  • Railway sleepers are another – slightly more expensive – option and are built to withstand ground and water contact.
  • Concrete sleepers are more expensive.

How do you build a retaining wall step by step?

Step by Step: How to build a retaining wall

  1. Dig a level-bottomed trench wide enough for the base stones to fit into. Compact the bottom of the trench with a hand tamper.
  2. Lay landscape fabric in the trench.
  3. Start the wall’s second layer using a staggered pattern.
  4. Make sure the wall is level.
You might be interested:  Question: How To Hang A Flag On A Wall Vertically?

Do I need drainage behind retaining wall?

Third, since most retaining walls are impervious, which means water cannot pass through the wall itself, efficient drainage is crucial. When drainage goes unaddressed hydrostatic pressure will build up behind the wall and cause damage such as bulging or cracking.

What is the best base for a retaining wall?

Due to soil erosion, your retaining wall should be built on a solid foundation made from gravel.

  • Choose gravel that has stones sized between 1/2-inch and 3/4-inch.
  • Fill the trench with a 2- to 3-inch layer of gravel.
  • Use a rake to ensure the stones are evenly distributed.

What can I use instead of a retaining wall?

Reinforced soil slopes are the most cost-effective retaining wall alternatives. Often times you are using the soil that you already have on hand and do not need to bring in any additional.



  • Reinforced Soil Slopes.
  • Natural Stone Walls.
  • Wooden Timbers.
  • Gabion Walls.
  • Soil Bioengineered Walls.

How much does it cost to build retaining wall?

The average cost of building a retaining wall is $5,636. Most homeowners find themselves spending between $3,229 and $8,670. The cost of retaining wall materials ranges from $3 to $40 per square foot. Wall block prices fall between $10 and $15 per square foot, while precase, poured concrete runs $20 to $25.

How long do retaining walls last?

How long will my retaining wall last? For a permanent wall structure, the general lifespan is generally between 50 and 100 years. This does, however, depend on the conditions of the soil and groundwater at your site.

You might be interested:  How To Repair Holes In Dry Wall?

How high can a retaining wall be without engineering?

How tall is your wall? Most municipalities require a building permit and a design from a Licensed Engineer if your wall is taller than 4 feet high (measured from the bottom of the first block to the top of the last block).

How deep do you dig for a retaining wall?

  1. Dig a base trench 24 in. ( 600 mm) wide the length of the wall.**
  2. The depth of the trench will be 6 in. ( 150 mm) plus an additional 1 in. (
  3. Compact the base trench making a minimum of two passes with a walk behind plate compactor.
  4. Foundation soils at the bottom of the base trench must be firm and solid.

What are the types of retaining wall?

The Four Basic Types of Retaining Walls

  • Gravity Retaining Wall. The most basic of retaining walls, the gravity retaining wall uses sheer weight and mass to hold the soil at bay.
  • Cantilevered Retaining Wall.
  • Sheet Piling Retaining Wall.
  • Anchored Retaining Wall.

How do you calculate retaining wall?

Multiply the length of the wall (in feet) by the height of wall (also in feet) to get the square footage of the outside face of the wall. Then, multiply 1.12. This allows for having 12% of the wall’s height under the surface of the ground to give the wall more stability.

Written by

Leave a Reply